TargetTalk

Hi

I have a new to me Pardini SPE with Pardini Fiocchi on the right hand side. Serial number is 4 digits with no prefix.

I am looking to adjust the over-travel and set up the trigger to 1000g for ISSF shooting.

I have seen other information about adjusting the Pardini triggers but none seem to have quite the same layout of screws on the trigger.
Does anyone have an original owners manual out there that they could share.?

I also have a MP in 32 which seems to have a very short recoil spring, shorter than my SPE 22 buy about 15mm, consequently the bolt velocity seems very high and the empties are thrown very violently for quite a distance (4-5 Meters) does anyone know how long a stock recoil spring for a MP 32 should be?

Cheers
Aaron T
New Zealand

Hi Aaron,

As for the manuals, go to the pardini website https://pardini.it/en/manuals-and-drawings/ and scroll down to the discontinued items.
On the older models, check if the rubber buffer that the slide bottoms out on is in good order. They eventually crack and need to be replaced.

Hope this helps

Hi rmca

Thanks for that

Cheers
Aaron

Although the screw placements may be a little different, I think the basic geometry and mechanical function of the older design is very similar to the new ones. It sounds like you may have already found this, but here is a guide I put together on adjusting the trigger system in the newer pistols. It's quite different from most firearms, and it's easy to get yourself in trouble if you don't understand how things work.

download/file.php?id=26555