Page 1 of 1

Walther LP300 - steer, advice and so on...?

Posted: Wed May 01, 2019 6:54 am
by Walnut92
So, the owner of the Walther LP300 which I borrowed has decided to sell it to me. I'm very happy as I am getting on with it very well - and as my other posts admit had caused me to 'want' a match pistol. However, this is a more economic option, especially given that I'm not any sort of expert.

Any steer or advice that anyone would like to proffer on owning or using or maintaining the LP300?

It was calibrated with 4.49 pellets, so that's what I'm using, although I imagine this isn't going to be critical for me.

Re: Walther LP300 - steer, advice and so on...?

Posted: Wed May 01, 2019 7:14 am
by Rover
It is not "calibrated" for 4.49 pellets, so use whatever you like. I recommend cheap RWS Basics.

Re: Walther LP300 - steer, advice and so on...?

Posted: Wed May 01, 2019 7:18 am
by Walnut92
I realised someone would object to that word as soon as I posted it - should have changed it to "the certificate provided with the gun indicates it was produced with 4.49mm pellets".

Seeing that you have raised/objected to this, I'd nonetheless like to learn why it was specifically shot at the factory with 4.49 not 4.48, 4.50 or 4.51.

Re: Walther LP300 - steer, advice and so on...?

Posted: Wed May 01, 2019 8:25 am
by Gwhite
My understanding is that the test groups are shot with whatever size of pellet they already have a tin open. If it passes, they ship the pistol. That's probably 99 out of 100 pistols. If they aren't happy with the group, they may try another pellet size, and if that doesn't work, they send it back for a new barrel.

Re: Walther LP300 - steer, advice and so on...?

Posted: Mon May 06, 2019 8:08 pm
by RJP
If the price is right and the grip fits you, jump on this AP. Unless you are an Olympic class shooter, you most probably will not benefit from anything newer.

A few words of caution. You may need a new air cylinder. My experience is that they will fail after 8 to 10 years depending on use and your maximum fill pressure. Also, an older gun may need service. I had mine resealed by Pilkguns a few years ago. It shoots like new.

Re: Walther LP300 - steer, advice and so on...?

Posted: Sun May 12, 2019 11:13 am
by Walnut92
Bought it.

Yes, ordered a new cylinder as a precaution. Shoots spot on.

Re: Walther LP300 - steer, advice and so on...?

Posted: Sun May 12, 2019 3:27 pm
by Rover
Gwhite wrote: Wed May 01, 2019 8:25 am My understanding is that the test groups are shot with whatever size of pellet they already have a tin open. If it passes, they ship the pistol. That's probably 99 out of 100 pistols. If they aren't happy with the group, they may try another pellet size, and if that doesn't work, they send it back for a new barrel.
Gwhite has it exactly right. They do NOT do pellet testing just for YOU.

I still recommend RWS Basics. Everyone who tries them (doesn't sip the Kool-Ade) stays with them.