Page 1 of 1
Lp50 safe chamber flag
Posted: Sat Oct 26, 2019 8:50 am
by Lablover
What’s the best thing to use as a chamber flag for a match for the LP50. I was told weed whip line but not sure it will come out of the side of lp50?
Open to suggestions
Re: Lp50 safe chamber flag
Posted: Sat Oct 26, 2019 9:23 am
by David Levene
The LP5/50 is a problem.
What we tend to say in the UK is that, when going forward to change targets or at other normal times when a flag is required, a length of line should just go across the pistol through the magazine port.
When boxing the pistol then we would expect a length of line to be pushed down the barrel so that it sticks out of the muzzle and can be seen when looking down into the magazine port.
Re: Lp50 safe chamber flag
Posted: Sat Oct 26, 2019 10:54 am
by 1066
I've developed a kit that fits the magazine fed air rifles where it's impossible to feed a line right through the barrel (As in ISSF, Rule 6.2.2.2)
Unfortunately no idea if it will fit the LP50 but if there were a few needed I could probably design and make something to suit I'm sure.
Re: Lp50 safe chamber flag
Posted: Mon Oct 28, 2019 5:25 pm
by Marc Orvin
This is how I do it. Quick and easy and cheap.
Re: Lp50 safe chamber flag
Posted: Mon Oct 28, 2019 5:51 pm
by Lablover
Marc Orvin wrote: ↑Mon Oct 28, 2019 5:25 pm
This is how I do it. Quick and easy and cheap.
Ok, that is brilliant! Thank for the tip
Joe