Page 1 of 1

Strong mount

Posted: Mon Mar 18, 2013 4:43 pm
by Freepistol
Is anyone using their Dillon 5-600 series without the strong mount, or do I need to spend another 50 bucks to get one?
Thanks!
Ben

Posted: Mon Mar 18, 2013 6:01 pm
by LukeP
I'll use it since 2008 without and no problem at all.
plus i can sit down, and look in the brass, because the press it's not too high.

Posted: Mon Mar 18, 2013 6:38 pm
by Isabel1130
I have a strong mount, but have not put it on the Dillon yet. You will need it if you want to attach a bullet tray. Some extra stuff that Dillon sells, attach to the Strong mount itself, and not to the actual press.

Posted: Mon Mar 18, 2013 10:41 pm
by Clintw
Another option; I use a welded T shaped plate with the press mounted to the horizontal and the vertical mounted in a vice. It gives me the height advantages of the Strong Mount but with quick dismount and rotation capabilities of a vice.

Posted: Tue Mar 19, 2013 12:21 am
by John C
I use a strong mount. Without it I had to mount the press on the edge of my workbench. Pulling the handle down with vigor caused the bench to rock because the vector of force tips the bench forward. Although I could have anchored my bench to the floor or wall, I chose to mount the press farther back on the bench top, so the force of pulling the handle went into the front legs of my bench. The added bonus is being able to use the bullet tray.

I don't think the strong mount is necessary, but it's a worthwhile purchase. Check out ebay, there's a guy making knockoff strong mounts that are equal to or better than the real thing. They're also a bit less money.

-John

Posted: Tue Mar 19, 2013 9:39 am
by Misny
I have a 550 without a strong mount on my bench. I operate it while sitting on a drafting stool. The 650 I have is mounted on the same bench utilizing the strong mount. I operate the 650 while standing. Both configurations work well for me.

Re: Strong mount

Posted: Fri Apr 05, 2013 10:26 am
by TonyT
Freepistol wrote:Is anyone using their Dillon 5-600 series without the strong mount, or do I need to spend another 50 bucks to get one?
Thanks!
Ben
I have used my 550 for over 15 years without the strong mount.

Posted: Fri Apr 05, 2013 10:56 am
by jackh
I use the strong mounts on each of 4 presses. The mounts are my quick change feature. I clamp or bolt the mount to the bench as needed. The off duty presses stand at ease in the corner on their own legs.

Posted: Wed Apr 10, 2013 12:57 am
by white_m
I always use strong mounts on my 650 as I am comfortable with it.

_________________
I can't imagine with ancient people use blow gun when hunting for foods.