Page 1 of 1
test driving a IZH-1
Posted: Wed Oct 24, 2012 10:36 pm
by siordian1
Hello all, I am a novice Free Pistol shooter and I am "test driving" a IZH-1 pistol. The pistol is in great shape and appears to have been shot very little. I have run approx 100 shots thru it but it seems to want to "miss-fire" about every 5th shot. I load it as normal push up on the lever above the trigger , apply pressure to the trigger and then, nothing. I eject the round and try again, sometimes it will work and sometimes it will suddenly go off with no pressure on the trigger. If anybody has suggestions or info on this pistol I would be most thankful.
Posted: Wed Oct 24, 2012 10:50 pm
by Clintw
It looks interesting. I have no experience with the model. However, from your description of the problems, I'm wondering if the firing pin might be captive but broken?
Posted: Thu Oct 25, 2012 3:41 am
by Sheila Sanchez
I think there is a slight problem in the pistol you might take it into the shop for further check-up.
_______________
"Some guys are the type of people who bring brass knuckle company to a fight. I've always thought it prudent to bring some running shoes."
Posted: Thu Oct 25, 2012 8:03 am
by RandomShotz
Ignore "Sheila Sanchez" - it's just a spammer.
I don't have an IZH -1, and I would think few people do. It looks like it has a Martini-style falling block action from the pictures here:
http://toz35.blogspot.com/2011/11/izh-1 ... istol.html
From your description, it sounds like the sear is not engaging properly. If it is like the TOZ 35 mechanism, the cocking lever opens the breech and engages the sear with the striker. You would feel a resistance to opening the breech that would let off when the breech is all the way open. If the sear is not engaging properly either because of wear or bad adjustment then the striker might not be retained when the breech is closed. The trigger will still set and "click" when you press it, but the gun will not fire. Also, if the sear engagement is faulty, the striker may sometimes be just barely detained by the sear and drop spontaneously.
Ask the owner if he knows how to adjust the sear engagement and see if that helps. If there is no adjustment then it will may have to go to a gunsmith.
It looks like a very interesting gun. I hope things work out for you.
Roger
Posted: Thu Oct 25, 2012 10:03 pm
by C. Perkins
George;
I will be at the Arizona state championships this weekend and hopefully you will be too.
Bring the pistol with you and I will take it home and see what is going on.
If you do shoot in the state championships, keep all of your once fired .22 brass so I can use it to check the pistol for function.
Clarence
Posted: Fri Oct 26, 2012 1:01 pm
by conradin
Very interesting grip. Usually this pistol has a totally enclosing grip, with grip and fore-end form a one big unit. You cannot even see your own hand!
izh-1
Posted: Fri Oct 26, 2012 9:10 pm
by siordian1
Thanks to all. I will see you tomorrow at the match Clarence. Thanks for your help.
Posted: Fri Oct 26, 2012 9:27 pm
by C. Perkins
See you in the morning.
Remember to save all of your .22 brass.
Clarence