Page 1 of 1
Need Izh-46M Trigger Info
Posted: Wed Nov 16, 2022 10:45 pm
by sparky
I need some help from someone with an Izh-46M and a set of calipers. Would you please measure the dimensions of the track that the trigger slides on? I need to know the width and height of the track.
Re: Need Izh-46M Trigger Info
Posted: Thu Nov 17, 2022 11:03 am
by brent375hh
I have both items. I can tell you the width is .135". The height is not possible for me to measure, nor the angle. Sorry, it sits too low in the recess to measure.
Re: Need Izh-46M Trigger Info
Posted: Thu Nov 17, 2022 8:44 pm
by BobGee
Shot in the dark: is it possible to slide the loosened trigger blade off the track and measure the opening in the top of the blade?
Bob
Re: Need Izh-46M Trigger Info
Posted: Fri Nov 18, 2022 10:52 pm
by seamaster
Track is not circular.
It is triangular with the top cut flat.
Re: Need Izh-46M Trigger Info
Posted: Sat Nov 19, 2022 12:58 pm
by seamaster
Top width is 2.5mm on my caliper.
Bottom width is 4mm.
Bottom to top is about 1mm.
Those are measure of trigger triangular track slot
Re: Need Izh-46M Trigger Info
Posted: Mon Nov 21, 2022 1:47 am
by sparky
Thank you all!
Re: Need Izh-46M Trigger Info
Posted: Tue Nov 22, 2022 12:28 am
by brent375hh
I did as Bobgee mentioned.
I get .115 inches at top, .145 inches at bottom.