Page 1 of 1
Morini 162EI cylinders - Europe
Posted: Wed Oct 21, 2020 3:07 am
by lamap
Hello all,
One of my Morini 162EI cylinders is leaking.
Can you please inform suppliers in Europe selling this?
Thank you
Luis
Re: Morini 162EI cylinders - Europe
Posted: Wed Oct 21, 2020 7:44 am
by Gwhite
I was going to recommend Krale, but they don't seem to sell Morini air pistols. I'd contact Morini and ask them. They probably also sell direct.
There is Edinkillie in Scotland:
http://www.edinkillie.co.uk/ecatalog/mo ... -1617.html, but I'm sure there are quite a few shops that can get them for you. Anyone who sells Gehmann for example.
Re: Morini 162EI cylinders - Europe
Posted: Wed Oct 21, 2020 8:54 am
by lamap
Hello,
Thank you.
Waiting for a replay from Moroni.
Best regards
Luis
Re: Morini 162EI cylinders - Europe
Posted: Wed Oct 21, 2020 12:30 pm
by spektr
Take a bit of silicone based light oil and libe the pin valve on the tank..... Exercise it with a small dowel or a punch and free up the valve.... They tend to get crusty with light corrosion and oil and exercise usually does the trick
Re: Morini 162EI cylinders - Europe
Posted: Thu Oct 22, 2020 2:33 am
by JonPersson
Re: Morini 162EI cylinders - Europe
Posted: Fri Oct 23, 2020 4:22 am
by lamap
Thank you JonPersson ,
One long red on my way from SE.
No reply's from Morini so far :-(
best regards