Changing LP10 absorber springs to EVO 10 spring?

[seamaster]

Any one with experience replacing those pesky 3 little springs on the LP10 absorber with the newer EVO 10 single spring?

[northpaw]

During adjustment of the piston travel of the absorber of my older LP 10, one of the three delicate small springs got lost. I then pullet the one-piece plastics "tension ring" (spring) from my LP 10 Evo E and replaced the small springs with this spring. That was last fall.
Seems to wook ok. The only difference I`m able to detect between the front ends of the absorbers of these two guns is that the recess milled near the front of absorber piston of the Evo 10 E does not have the 3 shallow springs seats drilled in the recess.

The problem now is to get this spare part (the one-piece spring), to get my LP Evo 10 E going.
Does anyone know where I could get that spare part? The distributor in this country could not supply one.
At the net, I located one distributor in India that may have quite some LP10 parts in stock. I`ll try to locate this spare part in Europe.

[Silvershooter]

Try Harry Preston at Steyr UK - search "Steyr Sport UK"