Page 1 of 1
Dry fire not working
Posted: Fri Jul 27, 2018 4:29 pm
by Ling678
I have a new Evo 10 short barrel. The dry fire was working but is not now. Any advice on how to fix this would be helpful. Thank you.
Re: Dry fire not working
Posted: Fri Jul 27, 2018 4:42 pm
by j-team
If you just got it new, take it back to where you got it. It's under warranty, don't try fixing it yourself.
Re: Dry fire not working
Posted: Fri Jul 27, 2018 5:29 pm
by atomicgale
Unless you got it from KRALE. Then you're stuck with no customer service.
Re: Dry fire not working
Posted: Sat Jul 28, 2018 2:50 pm
by Silvershooter
What are the symptoms ? Does it discharge air when the "T" is visible next to the cocking lever ?
Does it otherwise shoot normally ?
Re: Dry fire not working
Posted: Sat Jul 28, 2018 7:09 pm
by Ling678
Yes it discharges air when the T is visible. Otherwise it works ok.
Re: Dry fire not working
Posted: Sat Jul 28, 2018 10:19 pm
by j-team
Re: Dry fire not working
Posted: Sun Jul 29, 2018 5:16 am
by Silvershooter
Yes as j-team says, check this screw is not loose,if it has come loose it will need some thread locker and a good fitting screw driver to tighten.
https://www.youtube.com/watch?v=_GEBx2zYhVc
at 49 secs.