LEE PROGESSIVE 3 STATION

If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true

Moderators: pilkguns, m1963, David Levene, Spencer, Richard H

Forum rules
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
Post Reply
cashye15
Posts: 4
Joined: Fri Apr 29, 2011 12:29 am
Location: Australia

LEE PROGESSIVE 3 STATION

Post by cashye15 »

I have the above reloader and would like to know at which position 1 or 2 does it bell out the shell.
Mine seems to not be belling out, as when I position the projectile and set it, lead is shaved off. I do resize my projectiles after moulding from .314 down to .311.
John.
Spencer
Posts: 1890
Joined: Fri Feb 24, 2006 9:13 pm
Location: Sydney, Australia
Contact:

Re: LEE PROGESSIVE 3 STATION

Post by Spencer »

Station 1 (the front one) outside sizes and decaps
Station 2 caps on the downstroke then inside size + flare neck + adds powder on the upstroke
Station 3 seats projectile and crimps/remove flare.

If you are not getting flare, screw station 2 down further, but only enough to give the minimum flare needed to allow consistent feeding of the projectile.
https://leeprecision.com/cgi-data/instruct/TR2441.pdf
Post Reply