Page 1 of 1
FWB Air Cylinder thread
Posted: Sat Oct 21, 2017 2:02 pm
by RifleNUT2
I have a Feinwerkbau Model 800 Evolution and yesterday dropped the air cylinder tube on the ground and damaged the male tube threads. Can you tell me the correct thread count/pitch or the die needed to re-thread the male tube threads?
Thanks!
Re: FWB Air Cylinder thread
Posted: Mon Oct 23, 2017 4:43 pm
by High Left
From measurements taken off the bleed cap, I'd say it's an M18 x 1.5.
Re: FWB Air Cylinder thread
Posted: Mon Oct 23, 2017 4:52 pm
by TenMetrePeter
Just wondering how you will rethread using a die when the start threads are the damaged ones. Going to have to split the die first with a Dremel or crack it open with the die holder I guess.
Re: FWB Air Cylinder thread
Posted: Mon Oct 23, 2017 10:11 pm
by spektr
If it were me, i would be looking for a metric thread file
https://m.grainger.com/mobile/product/N ... File-3MD32
Re: FWB Air Cylinder thread
Posted: Sun Feb 11, 2018 1:32 pm
by Pheyden
Use a very fine 60 degree file to "dress" the thread, and then chase the threads with the proper die. Chasing the threads is vital, as you do not want to damage the threads in the receiver.