Page 1 of 1
SHOOTING JACKET MODIFICATION/ALTERATION
Posted: Wed Mar 29, 2017 10:07 am
by RED RAIDER
My daughter has an "Off the rack" shooting jacket. We need to move 2 of the buttons, but are out of room to move. The next size jacket is way too big. I have been told to have a piece of canvas or leather sewed onto the jacket to allow the buttons to be moved over the 1/2" needed. Will this pass equipment inspection at USJOC?
Also can some one offer a picture of how they modified their jacket?
Re: SHOOTING JACKET MODIFICATION/ALTERATION
Posted: Wed Mar 29, 2017 5:00 pm
by Jordan1s
it should be ok; a few years ago at winter airgun, I saw a member of the Nevada team attaching the buttons to a zip tie in order to pass inspection. To be safe, thoroughly check through the rulebook
Re: SHOOTING JACKET MODIFICATION/ALTERATION
Posted: Thu Mar 30, 2017 10:17 am
by TexasShooter
We have extended 2 coats by adding canvas material, and they both passed USAS inspection. Stagger the inside and outside seams so the seams are not on top of each other which will cause it to be too thick.
Re: SHOOTING JACKET MODIFICATION/ALTERATION
Posted: Thu Mar 30, 2017 11:19 am
by RED RAIDER
TexasShooter wrote:We have extended 2 coats by adding canvas material, and they both passed USAS inspection. Stagger the inside and outside seams so the seams are not on top of each other which will cause it to be too thick.
Any chance that you can send me pictures of the inside & outside of the jacket? It would be very helpful. Thanks
Re: SHOOTING JACKET MODIFICATION/ALTERATION
Posted: Thu Mar 30, 2017 11:27 am
by TexasShooter
RED RAIDER wrote:TexasShooter wrote:We have extended 2 coats by adding canvas material, and they both passed USAS inspection. Stagger the inside and outside seams so the seams are not on top of each other which will cause it to be too thick.
Any chance that you can send me pictures of the inside & outside of the jacket? It would be very helpful. Thanks
Both coats have been passed on to other kids. Sorry....
Re: SHOOTING JACKET MODIFICATION/ALTERATION
Posted: Thu Mar 30, 2017 12:29 pm
by COBelties
Agreed with adding an extra edge just be aware of the 100mm distance for jacket overlap (edge of jacket to center button), and also the thickness. I'm sure Joel could jump in, but if I remember right, zip ties are not allowable because they are adjustable. Look at section 7.5.4.
Re: SHOOTING JACKET MODIFICATION/ALTERATION
Posted: Thu Mar 30, 2017 1:19 pm
by jhmartin
COBelties wrote:Agreed with adding an extra edge just be aware of the 100mm distance for jacket overlap (edge of jacket to center button), and also the thickness. I'm sure Joel could jump in, but if I remember right, zip ties are not allowable because they are adjustable. Look at section 7.5.4.
I won't be at JOs this year but in the past we have used zip ties. The only thing that must be kept i mind is that if they do a post relay inspection ... those can be both random & targeted ... and the zip tie has been, even accidentally, tightened, and the jacket does not pass they are DQ'd for that day.
Especially for the JO's we try and be as lenient as we can ... a lot of those kids are about to toss their cookies if they are there for the first time.....