TargetTalk

I recently bought a Steyr LP-1P that dates from around 2000. The o-rings, which are all green, probably could use replacing, especially the ones on the cylinder pressure gauge and on the threaded fitting that goes between the valve on the scuba tank and the gun's compressed air cylinder. I'd like to replace the others on the gun as well. Where does one go to get replacements? I am thinking that perhaps the size and hardness of these o-rings are to some European standard.
-Marty-

You could try here: http://www.pilkguns.com/

...

Thanks j-team -- I have an email enquiry in to them.
-Marty-

If the parts list will tell you the size vs. the part number, it's easy. www.mcmaster.com will happily sell you bags of 100 for $5 or $6. Ace Hardware may well have the size for $.25 each. The green color is just dye: marketing.

Many other industrial supply houses as well.

what is the green o-ring number?

The high-compression resistant O-ring on the website are mostly non metric. Which dash number O-ring should we be looking for? I am very bad with metric-inch conversion.

nglitz wrote:The green color is just dye: marketing.

I may be wrong but I think you'll find that, at least in Europe, the green colour indicates a different grade of material.

Having said that, when I was using my Steyr a lot, I just bought bags of Viton O-rings at not-a-lot per 50 and changed the one on the cylinder attachment stem once per month.

Now that I rarely use it I just leave the green O-ring from the last service in place. It's lasted over 5 years.

David, it would not surprise me if you are right about the green o-ring color having a specification meaning. O-rings can be had in different hardnesses, for example. And then there are things like service temp, reactivity with other substances, longevity, and so on. The green o-rings on my gun feel quite hard, not at all spongy, when I press my thumbnail into them. I would feel best knowing that I had o-rings that met the design specs of the gun, rather than the o-rings from Lowes.

I have the manual for the gun, with the exploded parts view, but the part labels do not give any descriptive data such as material, OD and ID, or a Steyr part number. Is there an online website that gives that sort of information?

In any event, I got an email reply back from Pilk -- and a prompt one, for which I am appreciative -- saying that although they can furnish what I need, they would have to get back to me when their tech guy who handles these things returns from a match, to which he has toted their stock of o-rings for Steyrs.

-Marty-

I guess he's taking care of "the boys". He'll help you out.

The National Collegiate Pistol Championships are next week, and I know Buck usually attends. The MIT team is flying down to Fort Benning on Saturday.

There is a Canadian fellow on ebay that has rebuild kits. He may have just the cylinder ring as well.

David