TargetTalk

So I recently acquired a FAS 602, and after doing some reading here, the recoil buffers and clips seem to be the two items that will require frequent replacement. Domino sells service kits (http://www.dominoguns.it/index.php/comp ... /161/g1017), but I'm not sure if google translate if having issues, you can only buy parts in September? I'll certainly order a set of spares, but I'd like to have access to a supply of clips and buffers, without order all new springs and a firing pin every time. Does anyone have a suggestion one where to acquire just the buffers and clips?

Thanks!

-Jenrick

jenrick wrote:So I recently acquired a FAS 602, and after doing some reading here, the recoil buffers and clips seem to be the two items that will require frequent replacement. Domino sells service kits (http://www.dominoguns.it/index.php/comp ... /161/g1017), but I'm not sure if google translate if having issues, you can only buy parts in September? I'll certainly order a set of spares, but I'd like to have access to a supply of clips and buffers, without order all new springs and a firing pin every time. Does anyone have a suggestion one where to acquire just the buffers and clips?

Thanks!

-Jenrick

They are freely available from FAS in Italy at any time of the year :)

Yes, FAS in Italy were very helpful to me. Be aware of the shipping charges. They use DHL and, if I recall correctly, the fee is $35.00 USD.

Buy enough parts to offset the shipping fee.

Also, they accept PayPal.

Cheers,

Dave

Awesome, do I just need to email them rather then use their online store? I was very confused on the whole "can only order parts in September" bit on their webstore.

-Jenrick

I dealt with Raffaele Mencarelli

Raffaele Mencarelli

managing director

DOMINO S.r.l.
Via IV Novembre 54
20019 Settimo Milanese (MI) ITALY
Tel. 02 33512040 - Fax 02 33511587

P.IVA (Vat) 10587440156

lele@dominoguns.com

lele "at" dominoguns "dot" com

Cheers,

Dave

Awesome thank you so much. Does he speak English, or do I need to try out my very limited Italian?

-Jenrick

Just send your e-mail as normal, they are very helpful and once on their mailing list, you will get occassional updates.

I suppose I could just send them an email, but anyone know if they will ship firing pins?

Also are they any good? The last batch I had from the local distributor were dead soft, possibly they were locally made.

Call or contact Neal Stepp at ISS http://www.iss-internationalshootersservice.com/ and see if he can help. I've bought several SP602 parts, including hammer assembly, from him in the past.

No luck on contacting Mr. Mencarelli, that email address is rejected as non-existant.

-Jenrick

Greetings Jenrick,

Sorry for the dead link.

Here is a link to their contact page...

http://www.dominoguns.com/index.php/pag ... ntact.html

Cheers,

Dave