TargetTalk

Hi,
I am a HP/Prone shooter who dabbles in smallbore prone. I do not normally shoot at all with a scope, but I have a decent one(Sightron SIII 8-32x56) that I occasionally use for load development, etc. The rifles that i use this on all have picatinny rails on them, so it's easy to leave the rings on and swap between them. I'd like to be able to mount it on my 2013 to experiment a little with scope shooting, but don't have a suitable way to mount it. Is there anyone that makes/sells an extended picatinny rail that will mount on a AHG dovetail? Second choice would be a cantilevered 30mm scope mount that would fit the dovetail. I would definitely prefer a pic rail to go on the Anschutz, so the scope can be left in rings that would work for any of my rifles. Any help appreciated.

Thanks,
Erik

Buy another scope, the more the merrier.

Thanks Morgen, very helpful as usual!

Erik,

Something like this might work:

http://www.diproductsinc.com/Detail.asp ... 0&CAT=3599

Good luck!

Jason

Jeff Madison at MWerks makes them.
Ed

Ed & Jason, thanks for the tips. I will check out both of those ideas.

Thanks,
Erik

Give Bill Earnest of ESP a call.

Bill Earnest
345 Coal Street
Teverton, PA 17881
570-797-4872

http://woodsonrifle.dreamhosters.com/ea ... g-products

Jason wrote:Something like this might work:

http://www.diproductsinc.com/Detail.asp ... 0&CAT=3599

I ordered one to see if I could lower the scope on my prone rifle. Eye relief is a problem and it could be longer. It may work for silhouette or benchrest.

Mark