Page 1 of 1
STEYR LP10E
Posted: Wed Jan 28, 2015 1:42 pm
by Tegrat
My 20 days old electronic Steyr LP10E stopped functioning. Substitution of battery was unusefulll. Did anyone suffered of this problem?
Re: STEYR LP10E
Posted: Wed Jan 28, 2015 4:03 pm
by dronning
Have you had the grip off? I'd guess the electronic unit has come unplugged. Does the LED flash when you turn it on?
- Dave
Re: STEYR LP10E
Posted: Fri Jan 30, 2015 3:28 pm
by django
how is your steyr lp10 E now ? is it OK ?
Re: STEYR LP10E
Posted: Tue Feb 24, 2015 5:04 am
by Tegrat
My Steyr LP10E has been perfectly repaired. The spring has been removed.
Re: STEYR LP10E
Posted: Tue Feb 24, 2015 5:36 am
by argus
Are you referring to the spring that retracts the electronic module cable back into the grip?
Was it the factory or a distributor that suggested removal of the spring?
Re: STEYR LP10E
Posted: Tue Feb 24, 2015 8:06 am
by Silvershooter
Our Steyr agent in the UK suggests not to remove the spring as the cable can get trapped in the grip and break, needing a replacement board.
I had a XL grip on my LP10E and the spring was too tight so I threaded a short rubber band on to the end of the spring and over the cable to create the right amount of tension to retract the cable.
Re: STEYR LP10E
Posted: Tue Feb 24, 2015 11:23 am
by dronning
I stretched my spring so it still retracts the wires but doesn't pull so hard. Seems to work ok.
- Dave
Re: STEYR LP10E
Posted: Tue Feb 24, 2015 5:12 pm
by argus
Both good ideas, thank you.