Page 1 of 1
Walther KK300 w/anatomic torque setting
Posted: Mon Dec 22, 2014 7:07 pm
by efoleyjr
What torque setting on action screws is being used with the anatomic stock?
Ed
Re: Walther KK300 w/anatomic torque setting
Posted: Tue Dec 23, 2014 4:47 am
by KatoomDownUnder
Since the Alutec and Anatomic share the same actions, I'd go for 6nm. I check mine every few months as part of normal maintenance.
Re: Walther KK300 w/anatomic torque setting
Posted: Thu Jan 08, 2015 3:53 pm
by batty
personally:
5nm prone, 5.5nm kneeling and 6nm standing.... and they gradually tighten for every shoot so check them at the start
Re: Walther KK300 w/anatomic torque setting
Posted: Thu Jan 08, 2015 5:38 pm
by efoleyjr
Thanks to all for the info. After testing it has settled at 30" Lbs for best grouping.
Ed
Re: Walther KK300 w/anatomic torque setting
Posted: Thu Jan 08, 2015 6:14 pm
by justadude
For all our non-US friends 30 in-lbs of torque = 3.4 N-m of torque
'Dude