Page 1 of 1

Duplex frustration

Posted: Fri Nov 21, 2014 4:36 am
by jarkodobes
I got Duplex yesterday...bit frustrating...where do I start?
First I got two tiny screws with ever more tiny Allen key which I am suppose to stick somewhere to stabile the unit...I just managed to move it sideways enough to get it around the front tunnel.
Now I need collimator to get enough adjustment on both sides.
The duplex insert is a bit too small and interfere with the bubble I got on 22mm front tunnel .
Also While trying to secure the unit in the place I thought it should be screwed in , I pushed a small screw through and now is lost...
Does anyone know where to put the screws in to secure Duplex?
Should I try to get 4.2 or 4.5 insert at the front of the duplex since 4.0 mm is a bit small?
Is collimator hard to install...I hope no more 1 mm screws otherwise I'm screwed....
Why is it so hard to include a one page manual to tell you what to do exactly? I think For 160 Euros it should be included.....
Cheers
J

Re: Duplex frustration

Posted: Fri Nov 21, 2014 7:15 am
by Peter_Scant
I had the same question about the screws. What I eventually worked out was that they are used to lock the x-y adjustment. If you look carefully you can see two holes with threads.

I haven't bothered to install them.

I brought the front inserts in .2 increments to work out which worked best, the insert wasn't that expensive. Interestingly I'm using the smallest insert and would like a smaller one.

Re: Duplex frustration

Posted: Sun Nov 23, 2014 5:38 am
by Cumbrian
I had the same problem with the insert using a 22mm foresight with level on top. I tried a 4.2 but in the end I had to buy the maximum size that Centra offer, which is a 5.6 - or is it 5.8? Anyway, that clears the foresight and leaves the bubble visible, I also found the screws very fiddly and annoying. Finally, the total lack of instructions with these expensive and intricate little things is a disgrace.

Re: Duplex frustration

Posted: Mon Nov 24, 2014 5:25 am
by HWN1011
My Duplex stays in the shooting bag. The principle I quite like. The design and manufacture terrible.
The little pin size locking screws are a joke in fact my duplex didn't even come with any just a hole that hadn't even been threaded which I ended up doing myself.
Even with the locking screws done up I have found the duplex still has loads of movement in it. When used for 100yards shooting the movement increases so much it not usable.

Yet another item sold to us shooters without any real development or testing.

Re: Duplex frustration

Posted: Wed Nov 26, 2014 2:32 pm
by MarkTrew
We'll--I agree there should be some instructions!

Having said that, I did not find the initial use as complex as it has bee made out. Come on guys, if you are having trouble with something this small, with this few parts, how do you manage a relationship with your significant other?

Mark Trew

Re: Duplex frustration

Posted: Wed Nov 26, 2014 2:32 pm
by MarkTrew
We'll--I agree there should be some instructions!

Having said that, I did not find the initial use as complex as it has bee made out. Come on guys, if you are having trouble with something this small, with this few parts, how do you manage a relationship with your significant other?

Mark Trew