TOZ Problem
Moderators: pilkguns, m1963, David Levene, Spencer, Richard H
Forum rules
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
TOZ Problem
Set trigger won't set . Was working ok, then with pistol resting on bench ready for next shot ,set trigger , 10 seconds later pistol went off wile still on bench finger no were near trigger. Try to reset, lever goes down ok but comes up with a crunchy feeling and sears unset. Dropped trigger unit down can't see anything broken.
Leaf spring is broken or sear needs to be reset
Do a search and you will find more about this and different fixes.
If it is the leaf spring that happened to me. Ordered a replacement from Larry's.
If spring not broken follow instructions to adjust the sear.
Good luck!
If it is the leaf spring that happened to me. Ordered a replacement from Larry's.
If spring not broken follow instructions to adjust the sear.
Good luck!
TOZ Problem ( still have problem)
Haven't found a web site that helped yet. The issue is the sears are not engaging.I thought the upper sear looked warren so I replaced it.The new one look like old one. Not the problem. The sear adjustment screw backed out dosen't help. Any ideas?
toz
Without seeing its hard to try fix, you will be better off starting the set up from scratch , see link below
cheers Steve
http://www.pilkguns.com/tenp/default.htm
cheers Steve
http://www.pilkguns.com/tenp/default.htm
Re: TOZ Problem ( still have problem)
Turn the weight screw in a couple of turns. If it's set too light the sear will not engage.dsj wrote: The sear adjustment screw backed out dosen't help. Any ideas?
As this are the only two screws that adjust the trigger, if adding weight doesn't work you've probably got something broken or needing replacement.
Hope this helps.