Page 1 of 1
Left-handed shooters and Toz question
Posted: Thu Feb 07, 2013 6:06 pm
by adair
Two questions I was thinking about...
1) Are there any Olympic-level left-handed shooters? I don't know if I have ever seen any in world cup finals.
2) Are left-handers at any real disadvantage using a Toz35 being that the trigger doesn't go directly straight back?
Thanks
Re: Left-handed shooters and Toz question
Posted: Thu Feb 07, 2013 6:16 pm
by j-team
adair wrote:Two questions I was thinking about...
1) Are there any Olympic-level left-handed shooters? I don't know if I have ever seen any in world cup finals.
2) Are left-handers at any real disadvantage using a Toz35 being that the trigger doesn't go directly straight back?
Thanks
The trigger of a Toz isn't either handed. The shoe can be adjusted to face any way as can the direction it swings. These adjustemts can be made independent of each other. You can even turn it right around so you push it forward to fire (not reccommended!).
The only thing on a Toz that would be a slight hinderance for a lefty, is the trigger setting lever, it's on the L/H side of the pistol.
Posted: Thu Feb 07, 2013 6:37 pm
by adair
Correct me if this is not the case, but isn't the Toz trigger (when looking from the muzzle) canted slightly to the left and when pulled back follows a slight left-to-right path?
Posted: Thu Feb 07, 2013 7:57 pm
by funtoz
The Toz trigger is unique and truly amazing in its adjustability. The shoe is attached to a pin, and can be raised and lowered on that pin. The trigger pin rotates on a circular mount that can be turned to face the shoe any direction, through 360 degrees of rotation. You can, indeed, rotate the trigger so that it is released by pushing forward, rather than pulling back. It works fine in that configuration, but is hard to control. It also works fine facing at angles to either side of the pistol. The shoe, pin, and its carrier can also be moved along the axis of the barrel to accommodate various trigger finger lengths. Hard to adequately explain, but the trigger will handle left handers once you get the right grip. It is usually found with a grip for the right.
You might want to peruse the 10P files Scott hosts for us at
http://www.pilkguns.com/tenp/default.htm
Posted: Thu Feb 07, 2013 8:01 pm
by adair
Interesting, I did not realize that before. Thank you both for the info!
Posted: Fri Feb 08, 2013 8:38 am
by J.Hoes
I am left handed, shot a TOZ for a couple of years, late nineties.
The construction of loading lever and cocking lever makes the grip asymmetrical to the left.
I used the factory hand grip, which was bulky on the left side. Had to use a trigger shoe with 17mm offset to the left.
Could never really tighten the palm rest, the nut was fixed to the grip's wood.
I started a different approach: to construct a metal reinforced grip.
Took too much time. Sold the TOZ, bough a second hand Hammerli, later a Morini
In short: did some good shooting with TOZ, did not like the grip, did not like the off set trigger shoe.
Greetings Hans.
Posted: Fri Feb 08, 2013 7:35 pm
by 6string
I'd second the experiences mentioned by Hans.
Hämmerli is the only company that comes to mind that actually took the trouble to build specifically left hand free pistols. That is, with properly designed grips, and a set trigger lever on the right side. The receiver itself was actually specially constructed for this set trigger mechanism.
Jim
Posted: Sat Feb 09, 2013 4:42 am
by Tycho
Shot a TOZ left handed back in the late 90s. Never had any issues, built myself a new grip from a Morini stock, good trigger reach. But the grip has a few holes in it, so it might not be possible for everyone to get a good fit. What could be a problem - for higher trigger weights, it's recommended to keep the trigger pulled while cocking the mechanism, and that doesn't really work left handed...
Posted: Mon Feb 11, 2013 6:33 pm
by Rob
I got these grips from another lefty that was good! I have Morini grips, but never liked them.
Posted: Mon Feb 11, 2013 6:58 pm
by Rob
Here is the other side. I think they were made by Vitbarbo. The Morini's are a lot more thicker.