TargetTalk

I am looking for 32 S&W L loading data for SWC(or RN) 115gr cast bullets.Has anyone actually used this type of bullet (in a Revolver). Other wise I will interpolate from the 98/100 gr loading data.Thanks

Ernie Rodriguez wrote:I am looking for 32 S&W L loading data for SWC(or RN) 115gr cast bullets.Has anyone actually used this type of bullet (in a Revolver). Other wise I will interpolate from the 98/100 gr loading data.Thanks

I use HN314 greased (100gr) with 1,35gr VV310, cci primer in my Manurhin revover. What I will try next is about 1,5gr to see if I can get even smaller groups in the rest.

I also found out that the orgininal dillon tools decreise reduce the bullet size to about 310-311, so I actually made my own case sizing tool, that retains the bullet to about 314.

What kind of 32 revolver do you shoot?

//MFR

For the Lyman 3118 bullet, here's a few loads from "Ken Waters' Pet Loads".

2.0 Bullseye; 2.2 RedDot; 2.4 Green Dot; up to 3.5 Unique; up to 2.5 PB;
up to 2.8 WW231. Unique gave the highest velocity.

You should find something you like there.

Thanks guys for the help.Erod