TargetTalk

Just wondering if anyone ever had issue's with this bedding material. I recently aquired a used 2213 stock and was using a wood stock before that never gave me a lick of trouble getting the torque to a good tight group setting.

If anyone has any experience with this and some advise how to make it better please share.....

Thanks,

Tenring

Dont know if this is much help but i also have a 2213, the torque setting should be set at 6Nm.Thats what i set mine to and it shoots just fine.If you think the pad in there now is worn you can order a new one, item number 001969 also there is the abutment 001967.Good luck