Page 1 of 1
Touch up for Morini AP?
Posted: Tue Apr 19, 2011 6:49 pm
by IPshooter
I have a couple of small nicks in the finish on my 162EI. The nicks are on the side near the loading lever.
Does anyone have a recommendation for something to touch it up that will blend well?
TIA
Stan
Posted: Tue Apr 19, 2011 8:39 pm
by Rover
You could try a cold blue (available at a good gun store) or just touch it with a fine point Sharpie.
Posted: Tue Apr 19, 2011 8:44 pm
by Gwhite
If it's on the frame, I believe that is aluminum. Birchwood Casey sells an aluminum touch-up chemical. The touch-up bluing products meant for steel will not work.
Or, use a sharpie.
Posted: Sat Apr 23, 2011 9:46 am
by Misny
I've used Birchwood Casey Aluma Black on aluminum frame pistols and rifles, with small marks, with excellent results. I highly recommend it.