Page 1 of 1

Adjusting rake and cantor on Anshutz

Posted: Sat Dec 01, 2007 1:58 pm
by SLABS
OK I know this is probably a dumb one but how do you adjust the rake and cantor on a LP @ Anshutz. I know you have to take the grip off then what?

Re: Adjusting rake and cantor on Anshutz

Posted: Sat Dec 01, 2007 2:27 pm
by jipe
SLABS wrote:OK I know this is probably a dumb one but how do you adjust the rake and cantor on a LP @ Anshutz. I know you have to take the grip off then what?
The LP@ has the same frame as the LP10, the adjustments are made in the same way: remove the grip, there are two small screws on the back for cantor adjustement and four on the bottom for rake adjustment.

This is also explained in the user manual of the LP@ and LP10 that can be downloaded from the website of Anschutz and Steyr.

Posted: Sat Dec 01, 2007 8:38 pm
by Richard H
"Cantor"??? The guy who sings in the synagogue ;)

I take it you mean cant. If it is the same as the Steyr you just adjust the little screws on the frame under the grip. To adjust rake - adjust he the front and back to different levels, for cant adjust the left and right to different levels.