Page 1 of 1
Rare LP10
Posted: Thu Feb 15, 2007 3:29 pm
by Reinhamre
Hi,
Can anyone tell me more about this LP10 I have come across
LP10 Gold Cup 2003
Kent
Posted: Thu Feb 15, 2007 5:34 pm
by Axel
It will shoot tens, and only tens! ;-)
Sorry, I don't know much about it other than that this model (colour) has been made in only in small quantities.
Cheers
Posted: Fri Feb 16, 2007 1:08 am
by Bill Poole
Steyr made 100 of them to congratulate themselves for the performance of shooters using steyrs, I think Pilk said he sold 12 or 14 in the US, I got the last one :)
Poole
Posted: Fri Feb 16, 2007 3:51 am
by JulianY
Interesting barrel weight? at the end of the cylinder !
Reinhamre could I grab that pic for the wiki?
JY
Posted: Fri Feb 16, 2007 8:04 am
by David Levene
JulianY wrote:Interesting barrel weight? at the end of the cylinder !
That looks like a small barrel weight from an LP1/LP5. They used to make 2 sizes but, from memory, dropped the smaller one. It clamped onto the barrel shroud.
Posted: Fri Feb 16, 2007 1:30 pm
by JulianY
David Levene wrote:JulianY wrote:Interesting barrel weight? at the end of the cylinder !
That looks like a small barrel weight from an LP1/LP5. They used to make 2 sizes but, from memory, dropped the smaller one. It clamped onto the barrel shroud.
That's what I figures , I was juut surprised to see it on and LP10 since it has it's "own" weight system
JY
Posted: Fri Feb 16, 2007 2:20 pm
by David Levene
JulianY wrote:That's what I figures , I was juut surprised to see it on and LP10 since it has it's "own" weight system
I believe that the LP10 weights are steel. It could possibly have been easier to anodize the old style aluminium weights to the same colour as the shroud then to get the same colour from steel.
Posted: Sat Feb 17, 2007 2:07 am
by JulianY
David Levene wrote:JulianY wrote:That's what I figures , I was juut surprised to see it on and LP10 since it has it's "own" weight system
I believe that the LP10 weights are steel. It could possibly have been easier to anodize the old style aluminium weights to the same colour as the shroud then to get the same colour from steel.
Yes that a good point
Posted: Fri Mar 02, 2007 7:55 am
by Reinhamre
Hi!
I have bought the gun now and...
The right answer is... brass.
The trigger shoe is also made of a brass casting.
Kent
Posted: Fri Mar 02, 2007 8:02 am
by David Levene
Reinhamre wrote:
The right answer is... brass.
It's no wonder then that it's only very narrow, it must be quite heavy.
Posted: Fri Mar 02, 2007 9:06 am
by Reinhamre
It is 35 - 40 gram, to havey for me.
Posted: Fri Mar 02, 2007 12:41 pm
by deleted1
A few minutes of careful grinding with a dremel can decrease that weight if you have a mind to. Just a suggestion---I wouldn't touch it myself thinking down the road---as possibly selling it and wanting it all to be pristine.
Posted: Fri Mar 02, 2007 6:59 pm
by Fred Mannis
Still, not as bad as the original LP-1 weight which goes 50-55 gm. Maybe you can find one of the 'thin' LP-1 weights which ought to be ~ 25 gm.
Pistols are meant to be shot, not admired :-)
Fred
LP-1 weights
Posted: Fri Mar 02, 2007 10:28 pm
by JoeG
Right Fred, the weight we both have is 50 grams and the other smaller one that used to be offered was advertised as 25 grams.
PS How is that FWB P44 working out for you? Hope to catch up with you soon so I can get a look and a shot or two in... Be well, Joe G.