who is the "go to guy" for replacing a barrel and bedding a 1913 Anschutz.
My plan is to use the factory wood stock. Add Lilja barrel, have rifle bedded(either glass or pillar)
Should the action be threaded or left standard?
Thanks
JJ
Gunsmithing M1913
Moderators: pilkguns, Marcus, m1963, David Levene, Spencer
M1913 Gunsmith
JJ:
I would have Gene Davis do the work. Rifles he has smithed do very well in the BR-50 game and he did some very nice work on a Remington 40x for me that I use for smallbore prone. Gene may recommend pillar bedding the action. His e-mail address is:
gdavis10@columbus.rr.com
Everything I've read on the subject leads me to strongly advise that a new aftermarket smallbore barrel be threaded on.
Good Luck
Alan Carey
I would have Gene Davis do the work. Rifles he has smithed do very well in the BR-50 game and he did some very nice work on a Remington 40x for me that I use for smallbore prone. Gene may recommend pillar bedding the action. His e-mail address is:
gdavis10@columbus.rr.com
Everything I've read on the subject leads me to strongly advise that a new aftermarket smallbore barrel be threaded on.
Good Luck
Alan Carey