Page 3 of 3

Re: LP10E

Posted: Fri Jan 05, 2007 3:46 pm
by RobStubbs
ANON wrote:my sources are workers from steyr...
Ummm. Lets just see in a years time... Anyone taking bets ?

Rob.

Posted: Sat Jan 06, 2007 1:34 am
by SUPER_ANONOMOUS
I heard Steyr is coming out with a trigger than fires by thought command.
My source is the president of Steyr. Therefore, I must be telling the truth -or maybe I just made the whole thing up.

LP10E

Posted: Sat Jan 06, 2007 8:16 am
by ANON
i don't care if you don't believe me.

why should i post false information when i'm logged in anonymous as a guest???

LP10E

Posted: Mon Jan 08, 2007 9:11 am
by ANON
just talked to an employee of steyr. at the end of march they will release the LP10 with a new trigger unit that is fitted with ball bearings. therefore the trigger characteristics will improve, they say that it will be a lot "smoother".
again, the trigger unit from all present lp10's ca be exchanged to a new one.

but - no official news for the LP10E ;)

by the way: a few years ago, steyr produced a few lp50 with electronic triggers because of the former free regulation of the trigger weight. but as this regulation has been changed, they decided to go stay with the mechanical one.

Re: LP10E

Posted: Mon Jan 08, 2007 11:43 am
by David Levene
ANON wrote: by the way: a few years ago, steyr produced a few lp50 with electronic triggers because of the former free regulation of the trigger weight. but as this regulation has been changed, they decided to go stay with the mechanical one.
Where did they get that idea from. The rule has not changed at all. There is still no minimum trigger weight for the AP multi shot events, see rule 8.20.10.

LP10

Posted: Mon Jan 08, 2007 2:36 pm
by ANON
hm, you're right! i never shot rapid fire, so i don't know very much of this discipline.

i misinterpreted the answer from steyr. they had problems with the mechanical trigger of the lp5. for a short period they built the LP5 with an electronic trigger because of that. the reason that they didn't stay with the electronic trigger is that the mechanical one became better and didn't make problems any more. that was basically the same trigger as in the lp50.

sorry for the incorrect info...

Re: LP10E

Posted: Mon Jan 08, 2007 3:04 pm
by RobStubbs
ANON wrote:just talked to an employee of steyr. at the end of march they will release the LP10 with a new trigger unit that is fitted with ball bearings. therefore the trigger characteristics will improve, they say that it will be a lot "smoother".
again, the trigger unit from all present lp10's ca be exchanged to a new one.

but - no official news for the LP10E ;)
Don't take this the wrong way but there's no official news about anything. Your annonymous postings may in fact be true, but they could be total garbage. I reserve judgement until Steyr actually say something.

Rob.

LP10

Posted: Mon Jan 08, 2007 5:44 pm
by ANON
you can try to verify it for yourself. i think they will confirm at least that they will release the lp10 with the new trigger unit. that will take place in march, so chances are that they will tell you something about it...

Posted: Mon Oct 25, 2010 1:40 pm
by Guest345
ANON turned out to be right. I just thought this guy at least deserved vindication and an apology.

Re: LP10E

Posted: Mon Oct 25, 2010 2:16 pm
by David Levene
David Levene wrote:
ANON wrote: by the way: a few years ago, steyr produced a few lp50 with electronic triggers because of the former free regulation of the trigger weight. but as this regulation has been changed, they decided to go stay with the mechanical one.
Where did they get that idea from. The rule has not changed at all. There is still no minimum trigger weight for the AP multi shot events, see rule 8.20.10.
That obviously changed 2 years after my post.

Under the 2009 rules, 8.20.10, the minimum trigger weight is now 500g.