Page 2 of 2
Posted: Thu Jun 19, 2014 12:45 am
by Leon
David M wrote:zeleny wrote:
The last gun, with a -5 barrel, is either a number mismatch or a factory nomenclature error. Deduct $400 or add $600 accordingly.
The interesting question is what barrel is actually fitted, it could be a factory 6" lead barrel. Does the barrel have any markings or numbers ?
I have 2 x 210-5s fitted with factory lead barrels. There are no markings on the barrel to designate that it is a 'bleilauf' lead barrel. The lead barrels only were made in 6 inch versions.
So David, I think you may be right that is is a lead barrel.
Posted: Thu Jun 19, 2014 1:01 am
by David M
Leon wrote:I have 2 x 210-5s fitted with factory lead barrels. There are no markings on the barrel to designate that it is a 'bleilauf' lead barrel. The lead barrels only were made in 6 inch versions.
So David, I think you may be right that is is a lead barrel.
The lead barrels do have a serial number but it is not a P00XXXX number, but a small etched ET00XXX number on the barrel forward of the lockrings.
The origional P210 numbers are on the frame, slide and barrel (visable in ejection port)
Posted: Thu Jun 19, 2014 1:10 am
by vitoon.strider
David M wrote:Leon wrote:I have 2 x 210-5s fitted with factory lead barrels. There are no markings on the barrel to designate that it is a 'bleilauf' lead barrel. The lead barrels only were made in 6 inch versions.
So David, I think you may be right that is is a lead barrel.
The lead barrels do have a serial number but it is not a P00XXXX number, but a small etched ET00XXX number on the barrel forward of the lockrings.
The origional P210 numbers are on the frame, slide and barrel (visable in ejection port)
i'll check it out tonight and get back to you regarding serial number.
Posted: Thu Jun 19, 2014 4:20 am
by Leon
David M wrote:Leon wrote:I have 2 x 210-5s fitted with factory lead barrels. There are no markings on the barrel to designate that it is a 'bleilauf' lead barrel. The lead barrels only were made in 6 inch versions.
So David, I think you may be right that is is a lead barrel.
The lead barrels do have a serial number but it is not a P00XXXX number, but a small etched ET00XXX number on the barrel forward of the lockrings.
The origional P210 numbers are on the frame, slide and barrel (visable in ejection port)
Hmmm - will have to have a close look at mine. Both of mine are still new..
Posted: Thu Jun 19, 2014 9:04 am
by vitoon.strider
photos
Posted: Thu Jun 19, 2014 9:05 am
by vitoon.strider
photos
Posted: Fri Jun 20, 2014 4:35 am
by vitoon.strider
photos