Pardini K60/K90 Manual

If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true

Moderators: pilkguns, m1963, David Levene, Spencer, Richard H

Forum rules
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
Post Reply
marka4504
Posts: 12
Joined: Mon Nov 03, 2008 10:13 pm
Location: Newcastle Australia

Pardini K60/K90 Manual

Post by marka4504 »

Just bought a Pardini K60, would anyone have an old Manual for a Pardini K60 or K90, or could I get a copy of one. Any info would be appreciated as I am new to Air Pistol.
ausdiver99
Posts: 94
Joined: Sun Sep 05, 2004 1:39 am
Location: Singapore

Post by ausdiver99 »

Hi

I was looking for one too this morning! There is some sight and trigger adjustment information on the Pilk Guns site in the 10P section http://www.pilkguns.com/tenp/sppk60.htm.

The Pardini website has an exploded parts list which is available at http://www.pardiniarmi.it/manuali/k60-k90.pdf but there is no manual.

Assuming you know nothing about them here's something odds and ends to start with:-

The cyclinder should be placed in the freezer to chill it before filling. If this isn't possible cool it down by bleeding off some CO2.

My cylinder (black with 4 holes at the end to assist removal) weighs 225gm when full and I get about 120 shots with it.

The pellet loading lever must be open when you change cylinders otherwise the gas escapes.

The small hexheaded screw on the right hand side of the frame near the grip selects dry fire mode.


Hope this helps a little.

Regards
Pete
marka4504
Posts: 12
Joined: Mon Nov 03, 2008 10:13 pm
Location: Newcastle Australia

Post by marka4504 »

Thanks,
I checked them out they will help me get started, but it would still be handy to have an original manual or a copy of one. It's unusual you can usually download a manual off the net from some where but I can't find one on this. Any way thanks again.

Mark
ausdiver99
Posts: 94
Joined: Sun Sep 05, 2004 1:39 am
Location: Singapore

Post by ausdiver99 »

Mark

I thought it was odd that there weren't any too. These pistols were in their prime around the time the WWW got up and running mainstream - not just for geeks but a heap of googling didn't find much.

I have also been on the lookout around the state competitions but I haven't seen another competitor in Victoria using a K60. If I do I'll try to get the manual and scan it.

A gun dealer in Australia has one with the manual so I e-mailed them to see whether thy would scan it. I've also e-mailed Pardini and finally I also sent TargetTalk member "Bobby38555" an e-mail as he recently bought a K60 which had the manual.

Cheers

Pete
marka4504
Posts: 12
Joined: Mon Nov 03, 2008 10:13 pm
Location: Newcastle Australia

Post by marka4504 »

You have certainly done some homework Pete, Im in NSW so I will keep trying here. If I find one I will scan it and email it to you.

Mark
ausdiver99
Posts: 94
Joined: Sun Sep 05, 2004 1:39 am
Location: Singapore

Post by ausdiver99 »

Mark,

The gunstore is an online one out at St Mary's!

http://paddisoncustom.com/

Cheers
marka4504
Posts: 12
Joined: Mon Nov 03, 2008 10:13 pm
Location: Newcastle Australia

Post by marka4504 »

Pete,
I sent them an email offering to buy the manual alone, or to get a copy of it. I will let you know how I go.


Mark
ausdiver99
Posts: 94
Joined: Sun Sep 05, 2004 1:39 am
Location: Singapore

Post by ausdiver99 »

Alberto Trincia from Pardini has pointed to this link on their website. Thanks Alberto.

http://www.pardini.it/download.asp?pg=2
marka4504
Posts: 12
Joined: Mon Nov 03, 2008 10:13 pm
Location: Newcastle Australia

Post by marka4504 »

Thanks Pete,

You have been busy, you have done well mate. I'm just about to go out but I will look over it when I get back. Once again thanks mate.


Cheers Mark
marka4504
Posts: 12
Joined: Mon Nov 03, 2008 10:13 pm
Location: Newcastle Australia

Post by marka4504 »

Thanks also to Alberto

Cheers, Mark
adler58
Posts: 2
Joined: Thu Nov 27, 2008 2:32 pm

Post by adler58 »

Hello friend,

I live in Italy and have got a K60, purchased used about 1 year ago and in great form

I am scanning the manual, then will put it in a site where you can download it. Just wait me doing the scan ...
Guest

Post by Guest »

Thanks for that my friend, hopefully One day I will be able to return the favour.

Cheers
Mark
Guest

Post by Guest »

I just discovered that a complete scan of the K60 manual is already present at Pardini web site

Here it is:
http://www.pardini.it/manuali/pardini%2 ... p%20sp.pdf

It is multilingual (italian-english-french)

Enjoy your K60, it is a jewel-pistol!
adler58
Posts: 2
Joined: Thu Nov 27, 2008 2:32 pm

Post by adler58 »

Anonymous wrote:I just discovered that a complete scan of the K60 manual is already present at Pardini web site

Here it is:
http://www.pardini.it/manuali/pardini%2 ... p%20sp.pdf

It is multilingual (italian-english-french)

Enjoy your K60, it is a jewel-pistol!
I forgot to log in so I was recorded as "guest" but it was me

No need of scanning, my manual is exactly the same. All Pardini pistols are described, including the fire ones, so please look inside the manual for your K60

Cheers

Aurelio , from Italy
marka4504
Posts: 12
Joined: Mon Nov 03, 2008 10:13 pm
Location: Newcastle Australia

Post by marka4504 »

Thanks Guys
Post Reply