Do the Pardini .32 shooters have a preference for a certain diameter projectile. Have you tested your guns performance with projectiles of different diameters.
If so what is your preference.
.311
.312
.313
.314
or other
And what was the basis for you selection, did you slug the barrel, test group sizes in a vise or just gut feel.
Thanks in advance
Mike
.32 Projectiles for Pardini HP
Moderators: pilkguns, m1963, David Levene, Spencer, Richard H
Forum rules
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
I have slugged the barrels of my two HP´s
the old one (the old model without springloaded weights) needs .312 bullets
and the newer HP-New needs .314 bullets
In the old models i have seen guns with barrels from .309-.315
In the NEW model all three i have slugged have been .313-.314
So it looks like a clear improvement have been done in this area at the Pardini factory.
the old one (the old model without springloaded weights) needs .312 bullets
and the newer HP-New needs .314 bullets
In the old models i have seen guns with barrels from .309-.315
In the NEW model all three i have slugged have been .313-.314
So it looks like a clear improvement have been done in this area at the Pardini factory.