I hear of people using duct seal in there pellet traps.
Is it or a similar product available in NZ? If so do you know of a supplier?
Thanks
Paul
A Question for the Kiwi's
Moderators: pilkguns, m1963, David Levene, Spencer, Richard H
Forum rules
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
Hi Paul,
I could not find the duct seal product here in NZ and ended up using a plastacine product from a modeling store (it came in 3 grades soft, medium, hard) I used the hard grade and put a tray filled with it in the back of my pellet trap. Every so often I have to dig some of the pellets & clay out and top it up, but its quite workable. The store that sold it (I think) was
TopMark Products
Ph: 09-580 2488
Unit 4/ 136 Marua Road, Ellerslie, Auckland
I could not find the duct seal product here in NZ and ended up using a plastacine product from a modeling store (it came in 3 grades soft, medium, hard) I used the hard grade and put a tray filled with it in the back of my pellet trap. Every so often I have to dig some of the pellets & clay out and top it up, but its quite workable. The store that sold it (I think) was
TopMark Products
Ph: 09-580 2488
Unit 4/ 136 Marua Road, Ellerslie, Auckland