Match grips for IZH-35

dmarschal · Post by **dmarschal** » Mon Sep 17, 2007 1:04 am

Hello,
With JamesH's help I was able to make match grips for IZH-35.

It's a left-handed stock made for 85 millimeters wide hand.
When making left-handed grips the top edges may go very thin. This issue was corrected by glueing a rotated grainline ash-wood piece into the walnut block.

Thanks again!
Dennis

rrpc · Post by **rrpc** » Tue Sep 18, 2007 11:07 am

Why is the IZH grip so much more expensive than the other match grips?

The others are all $100, the IZH is $150!

Brian James · Post by **Brian James** » Tue Sep 18, 2007 1:50 pm

I can only speculate, but perhaps the machining required is greater. From what I call the other match grips (GSP, Pardini, MCM) are all fairly basic in terms of inletting the wood.

Brian

rrpc · Post by **rrpc** » Tue Sep 18, 2007 4:53 pm

Brian James wrote:I can only speculate, but perhaps the machining required is greater. From what I call the other match grips (GSP, Pardini, MCM) are all fairly basic in terms of inletting the wood.

Brian

You may have a point Brian, and I can see that there is no wood at the back of the grip where others have a completely filled back end, meaning a lot more (careful) cutting.

On the other hand, both Nill and Rink make IZH35 grips for the same price as for other manufacturers.

dmarschal · Post by **dmarschal** » Wed Sep 19, 2007 12:51 am

rrpc: The reason is more simple. I mistyped the price on my site. It's $100 like the "simple" ones.

Thanks,
Dennis

rrpc · Post by **rrpc** » Wed Sep 19, 2007 2:18 am

dmarschal wrote:rrpc: The reason is more simple. I mistyped the price on my site. It's $100 like the "simple" ones.

Thanks,
Dennis

Great! You may be getting an order from me soon :)

diopter · Post by **diopter** » Mon Oct 01, 2007 6:12 am

Do you make free pistol grips for the Drulov?

dmarschal · Post by **dmarschal** » Tue Oct 02, 2007 4:47 am

diopter wrote:Do you make free pistol grips for the Drulov?

Hello,
I've made a set a few years ago. It was made for the mod 70 Drulov. I could make some computer rendered images of the 3d model to show what they look like. Please let me know if you're interested.

I think I copied the toz-35s outside with some modifications, angle, palm rest, etc.

diopter · Post by **diopter** » Tue Oct 02, 2007 7:45 am

Sounds very interesting indeed.
look for my email.

rrpc · Post by **rrpc** » Tue Oct 09, 2007 8:01 am

I ordered a set of the IZH 35 match grips in Medium LH from Dennis last week, and they arrived by post today!

All I can say folks is you won't go wrong with these grips. The workmanship is first class and they look as good (if not better) than the photos.

TargetTalk

Match grips for IZH-35

Match grips for IZH-35

Drulov 70 free pistol grips