BB gun trigger pull

Hints and how to’s for coaches and junior shooters of all categories

Moderators: pilkguns, Marcus, m1963

Post Reply
Nathan

BB gun trigger pull

Post by Nathan »

Is there a rule for a minimum trigger pull weight for a BB gun?

I went to my first match and saw the pellet rifles being tested but not the BB guns. Just wondering why.

Thanks.
Nate
Haireacane

Trigger Pull

Post by Haireacane »

According to the NRA BB gun rulebook there is not a weight limit on the trigger pull however you are not allowed to alter any of the internal parts of the gun.

We've found that the triggers get much better with use. A new trigger is very stiff but after use they do improve but continue tohave a lot of take-up.

David
Nathan

BB gun trigger pull

Post by Nathan »

I was told that testing the trigger pull was for safety. If that is right then wouldn't if be unsafe not to have one for BB guns?
User avatar
RobStubbs
Posts: 3183
Joined: Mon Mar 01, 2004 1:06 pm
Location: Herts, England, UK

Re: BB gun trigger pull

Post by RobStubbs »

Nathan wrote:I was told that testing the trigger pull was for safety. If that is right then wouldn't if be unsafe not to have one for BB guns?
See the above; if the gun cannot be altered then it can't have an 'unsafe' trigger. I presume they test pellet rifles to check the trigger isn't too light, but that's not a safety issue more a rule check.

Rob.
GL

BB gun trigger pull

Post by GL »

The rules do state you can't alter the trigger. But don't tell me that there aren't some who are "working" on the trigger.

Besides, without a trigger pull test how are you going to know if the trigger has been altered?
Jake

BB gun trigger pull

Post by Jake »

My son has shot BB gun for 4 years and had hit a plateau with his scores. So I began to ask around for suggestions. I was amazed at the number of people who said to get a trigger job. Many of these have shot at international events. They all thought its OK since there is nothing being done to check if its done. At most its a drop test at a few events.

I would suggest that the triggers be tested at 1.5 lbs as 3P air rifle is. Unless that is unsafe for the trigger design.
GaryN
Posts: 637
Joined: Mon Mar 01, 2004 4:57 pm
Location: California

Post by GaryN »

I can see a reason for the rule. They want to level the field and have no one have an advantage over another. But IMHO the word ALTERING is the problem.

Is removing burrs/bumps/and other rough spots on the sear altering?

Yes, because you are doing "something" to the stock mechanism.

No, because you are not changing the mechanics as you would with a lighter spring, or reducing the sear engagement.

The only way to get this clear is to get an official ruling/interpretation of the rule.

At some point, if they feel too many people are using a "loophole" in the rules, they will probably make trigger specific rules and put a trigger test into the rule.
Nathan

BB gun trigger pull

Post by Nathan »

Ok, I like what you say GaryN. But how do I go about getting a ruling or having a change (new) to the rule consider?
GaryN
Posts: 637
Joined: Mon Mar 01, 2004 4:57 pm
Location: California

Post by GaryN »

Nathan
I'm not into the programs, so I don't know who the rulemaking bodies are. My guess is the NRA, but who to talk to...no idea.
SRichieR
Posts: 120
Joined: Fri Dec 29, 2006 8:39 am
Location: Shelby County Shooting Sports; Alabama

Post by SRichieR »

Every BB match I've been to has used the NRA 5 Meter BB Gun rule book. 4H, Daisy and others put some of their own stipulations in which is allowed in the rulebook.

I don't know of another commonly used BB gun rule book in the US. Not that there isn't one out there somewhere.
GL

bB gun trigger pull

Post by GL »

Nathan
I would send your question to the NRA. Though you could always make it a petition to add the trigger pull requirement to the rules too.
Dl Guest

BB Trigger

Post by Dl Guest »

You can hone and polish w/o altering the intended use. Honing and Polishing should help with trigger pull without altering its intended use.
Post Reply