Help for Disabled Shooter

If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true

Moderators: pilkguns, m1963, David Levene, Spencer, Richard H

Forum rules
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
Post Reply
alexisNZ

Help for Disabled Shooter

Post by alexisNZ »

Hi,

I am a disabled shooter and have recently taken up AP. I have a LP10 and need to get or make a stand to sit it in while I reload it. Preferably it would be in such a position to allow me to achieve the same grip every time as I pick it up.

Any help / ideas greatly appreciated.

Thanks,
Alexis
Bill177
Moderator
Posts: 271
Joined: Tue Mar 02, 2004 9:32 am
Location: Upstate NY

Stand

Post by Bill177 »

There is a picture of an Izzy sitting in a stand at:
http://www.necoastal.net/izzy/izzy.htm

Something built similar to this example should allow you to open and close the breech while the gun is in the stand - then pick up the gun with the same position and grip each time.

I have a similar stand built for a K2 that would function well for this. Place the gun in the stand, open the flip-top breech, insert a pellet, close the breech, and pick up the gun.

The left canted angle serves two purposes - 1. keeps the gun in its place and 2. provides a good pickup angle.

Rubber feet on the bottom of the stand will keep it from sliding around.
User avatar
pgfaini
Posts: 328
Joined: Sun Oct 24, 2004 2:34 pm
Location: North Carolina

Post by pgfaini »

If you need to be able to operate the pistol with one hand, I think that perhaps the front portion should encircle the barrel, or at least have a portion that lies above it, to keep the barrel from rising when you open the loading latch, if it's one that swings up, like on my 162E. This would keep you from having to hold the gun down with the fingers of the same hand, as you open it.
cdf
Posts: 266
Joined: Wed Aug 31, 2005 10:19 pm
Location: Ontario , Canada

Post by cdf »

For a while I used a sandbag from a benchrest barrel rest (liberally loaded with lead ). Being a lazy old bugger I used to frequently load my Lp 10 one handed . YMMV .

Chris
Spencer
Posts: 1890
Joined: Fri Feb 24, 2006 9:13 pm
Location: Sydney, Australia
Contact:

Re: Help for Disabled Shooter

Post by Spencer »

alexisNZ wrote:Hi,

I am a disabled shooter and have recently taken up AP. I have a LP10 and need to get or make a stand to sit it in while I reload it. Preferably it would be in such a position to allow me to achieve the same grip every time as I pick it up.

Any help / ideas greatly appreciated.

Thanks,
Alexis
If in NZ, I would suggest you contact Ross Mason - he was ISCD Team Manager for Athens and has a wealth of experience in this field.
You will need to get his contact details through NZSF

Spencer
PaulB
Posts: 597
Joined: Tue Mar 09, 2004 9:18 am
Location: Charlottesville, VA
Contact:

Post by PaulB »

You might want to contact David Baskin at NRA Disabled Shooting Services at 703-267-1495. I could not find his email at their web site:

http://www.nrahq.org/compete/disabled.asp
Post Reply