Steyr LP10: #20 Set screw: to be lubricated or wiped dry?

If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true

Moderators: pilkguns, m1963, David Levene, Spencer, Richard H

Forum rules
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
Post Reply
Alexey931
Posts: 29
Joined: Thu Mar 11, 2004 1:44 am
Location: St.-Petersburg, Russia

Steyr LP10: #20 Set screw: to be lubricated or wiped dry?

Post by Alexey931 »

Hi, everybody,

First, thanks to Mr. Pilkington. He rescued me with #52 Hammer Spring. Now I am back in business. It is no small thing, to get hold of such trifles in Russua. Now the subject question. It seems to have been lubricated (has some black durt on it), but I am not quite sure, and the part is close to the high pressure system. Am I to put some silicon lubricant on the shaft (and tip of the shaft) of the set screw?

Best regards, Alexey
Top
Alexey931
Posts: 29
Joined: Thu Mar 11, 2004 1:44 am
Location: St.-Petersburg, Russia

Post by Alexey931 »

Is it a trade secret :)?

Best regards, Alexey
Top
User avatar
pilkguns
Site Admin
Posts: 1180
Joined: Fri Feb 20, 2004 7:22 pm
Location: Monteagle, TN

Post by pilkguns »

The spring should not have anything on it on terms of lubricant. maybe a very thin coat oil to prevent rusting, but that is all.

Glad you got the part
Top
Post Reply

Return to “Olympic Pistol”