HILL PUMP QUESTION

If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true

Moderators: pilkguns, m1963, David Levene, Spencer, Richard H

Forum rules
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
Post Reply
darticus
Posts: 318
Joined: Sat Sep 03, 2005 11:01 am
Location: SPARTA NEW JERSEY

HILL PUMP QUESTION

Post by darticus »

I pump up my cylinder to 200 bars and the hill pump instructions say loosen the bleeder valve than remove your cylinder.When I do this air leaks from the bleeder valve and the cylinder drops in pressure.Now I don't open the bleeder valve and just unscrew my cylinder.Which is correct?Should the bleeder valve let pressure drop from cylinder?Ron
Top
SteveT
Posts: 287
Joined: Sat Mar 06, 2004 8:17 pm
Location: IL
Contact:
Contact SteveT

Post by SteveT »

Unscrew your cylinder 1/2 - 3/4 turn to close the cylinder valve. Then open the bleed screw.

Steve T
Top
darticus
Posts: 318
Joined: Sat Sep 03, 2005 11:01 am
Location: SPARTA NEW JERSEY

thanks Steve

Post by darticus »

SteveT wrote:Unscrew your cylinder 1/2 - 3/4 turn to close the cylinder valve. Then open the bleed screw.

Steve T
Top
Post Reply

Return to “Olympic Pistol”