Miracle Cure for Fussy Benelli .22's!
Moderators: pilkguns, m1963, David Levene, Spencer, Richard H
Forum rules
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
-
cgpro856@aol.com
- Posts: 2
- Joined: Tue Apr 16, 2024 9:02 pm
Re: Miracle Cure for Fussy Benelli .22's!
Can anyone help me find a firing pin and extractor for my MP90s? The original pin broke. I had a replacement that I bought when I bought the gun new but I’m having all kinds of new extraction problems since I installed the new firing pin.
Re: Miracle Cure for Fussy Benelli .22's!
Have you checked the length of the firing pin? This is exactly the problem we had until I found out about the length problem with the newer pins. They should be very close to 31.1 mm from the tip to the front of the head, assuming you have an older pistol.
The other thing to check is that the broken bits of the old pin didn't damage anything. I've seen that happen, but in my case, it cause feed issues because of a burr on the bolt face.
The other thing to check is that the broken bits of the old pin didn't damage anything. I've seen that happen, but in my case, it cause feed issues because of a burr on the bolt face.