New Grip Treatment
Moderators: pilkguns, m1963, David Levene, Spencer, Richard H
Forum rules
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
New Grip Treatment
I have recently taken possession of a brand new Morini Free Pistol (CM84E).
The wooden grip is not treated or coated in any way.
Should I oil it? Boiled linseed oil?
Or is there another treatment?
Or should I leave it raw?
Thanks.
Advice appreciated.
The wooden grip is not treated or coated in any way.
Should I oil it? Boiled linseed oil?
Or is there another treatment?
Or should I leave it raw?
Thanks.
Advice appreciated.
Re: New Grip Treatment
That's odd. They usually come oiled. I think I even have a can of Morini grip oil buried some place.
My favorite treatment for grips is Watco Danish Oil ("Natural"). It's a polymerizing oil that soaks into the wood and then sets up. It provides good protection for the wood, and is easy to apply. Dabbing on a bit more when you make modifications to the grip is also easy.
My favorite treatment for grips is Watco Danish Oil ("Natural"). It's a polymerizing oil that soaks into the wood and then sets up. It provides good protection for the wood, and is easy to apply. Dabbing on a bit more when you make modifications to the grip is also easy.
Re: New Grip Treatment
Try multiple coats of Linseed oil/Turps mixed 50/50.
Coat, let dry (48hrs), rub to polish and re-coat.
Also good for annual touch ups.
Coat, let dry (48hrs), rub to polish and re-coat.
Also good for annual touch ups.
Re: New Grip Treatment
I imagine they do that so you can modify the (sure NOT to fit) grips to suit your hand. AFTER you've done that, then I like Gwhite's answer, but I personally would not bother to finish them. Between the hacking and the putty, they'll be ugly anyway.
Re: New Grip Treatment
This is why I prefer Watco. Apply, let it soak in for 10-15 minutes. Apply again, let it sit for 15 minutes & wipe off any excess. Let it sit overnight & you are done.
Outside of the USA, look for "Danish Oil" wood finish. There are lots of different formulations, but they all should fully cure overnight.
-
- Posts: 864
- Joined: Fri Mar 10, 2017 7:34 am
- Location: Copperhill Tennessee USA (a registered CERCLA superfund site)
Re: New Grip Treatment
Just shoot it . . . .
Re: New Grip Treatment
Thanks everyone for your advice.
I think I’ll try the danish oil.
Regulations require me to store the pistol at my club armoury for another 5 weeks. After that I’ll give it a go and let you know how I went.
I think I’ll try the danish oil.
Regulations require me to store the pistol at my club armoury for another 5 weeks. After that I’ll give it a go and let you know how I went.
Re: New Grip Treatment
Get the real deal:
Scherell’s stock finish:
http://schaftol.de/
This is what Rink uses and recommends and is a great product.
Check eBay- there is a seller in Canada which sells match equipment to buy from- I got product in a couple of days.
Scherell’s stock finish:
http://schaftol.de/
This is what Rink uses and recommends and is a great product.
Check eBay- there is a seller in Canada which sells match equipment to buy from- I got product in a couple of days.
Re: New Grip Treatment
> Scherell’s stock finish:
+1 to Scherell's, I get mine from Rink. The applicator on the bottle wastes very little.
+1 to Scherell's, I get mine from Rink. The applicator on the bottle wastes very little.