Barnard P action in a Feinwerkbau 2700 stock
Moderators: pilkguns, Marcus, m1963, David Levene, Spencer
Barnard P action in a Feinwerkbau 2700 stock
Does anyone know if it is possible to fit a Barnard P action into a FWB 2700 aluminum stock. If so, what modifications are required? I am looking to use the same stock for both the FWB action and the Barnard in .308. Thanks!
Re: Barnard P action in a Feinwerkbau 2700 stock
It is surely possible but will need some custom engineering. If a "P" action
can be fitted to an Anschutz precise stock than a FWB 2700 metal stock should be viable too.
http://bulletin.accurateshooter.com/201 ... lma-rifle/
can be fitted to an Anschutz precise stock than a FWB 2700 metal stock should be viable too.
http://bulletin.accurateshooter.com/201 ... lma-rifle/
-
SRay53txtn
- Posts: 111
- Joined: Thu Sep 11, 2014 12:35 pm
Re: Barnard P action in a Feinwerkbau 2700 stock
I have a Whidden & Randy Gregory adapter for my Barnard P that fits the square 2000 series Precise stock.
Not sure what the FWB 2700 configuration is, however, it is doable. Contacting one of them or a local reputable gunsmith machinist in your area may be the best approach.
Not sure what the FWB 2700 configuration is, however, it is doable. Contacting one of them or a local reputable gunsmith machinist in your area may be the best approach.