Hello!
I have GEHMANN 200 bar HAND PUMP & Steyr LP-10 (cylinder with manometer).
Please, write step-by-step instructions for right charging!
rulyov_igor-at-hotmail.com.45341.0
Hand pump - instructions wanted!
Moderators: rexifelis, pilkguns
-
RML
Re: Hand pump - instructions wanted!
1) Put the adapter that came with your pistol on the pump. Thighten it carefully. Let it stay on the pump. No need to remove it again every time you have filled the pistol-cylinder.
2) Remove the cylinder from the pistol and screw it onto the adapter on the pump (all the way until it stops).
3) Make sure the valve on the pumpe is closed (screw on the pump somewhere).
4) Pump with full strokes until the manometer shows 200 bar.
5) Unscrew the cylinder from the adapter half a turn (180 degrees) to close the cylinder. Leave it there until pt. 6.
6) Open the valve on the pump to empty the compression chamber of the pump and get rid of any humidity that may have been trapped there.
7) Unscrew the cylinder completely from the pump, and put it back on the pistol.
RML
.45346.45341
2) Remove the cylinder from the pistol and screw it onto the adapter on the pump (all the way until it stops).
3) Make sure the valve on the pumpe is closed (screw on the pump somewhere).
4) Pump with full strokes until the manometer shows 200 bar.
5) Unscrew the cylinder from the adapter half a turn (180 degrees) to close the cylinder. Leave it there until pt. 6.
6) Open the valve on the pump to empty the compression chamber of the pump and get rid of any humidity that may have been trapped there.
7) Unscrew the cylinder completely from the pump, and put it back on the pistol.
RML
.45346.45341