Scope caps for Aimpoint Hi Micro

Brought to you by Zero Bullet Company Inc.

Moderators: pilkguns, m1963, Isabel1130

Post Reply
bentrod
Posts: 40
Joined: Thu Apr 10, 2008 9:06 am
Location: West Michigan

Scope caps for Aimpoint Hi Micro

Post by bentrod »

I lost the Scope caps for my Aimpoint Hi Micro, where do I find replacements? And how do I make adjustments until I find replacements?

Thanks

Jim
SteveT
Posts: 288
Joined: Sat Mar 06, 2004 8:17 pm
Location: IL
Contact:

Re: Scope caps for Aimpoint Hi Micro

Post by SteveT »

Have you tried contacting Aimpoint?

Google "Aimpoint Adjutment Tool" and you'll get lots hits. Amazon can get you one in a few dayshttps://www.amazon.com/AimPoint-12207-M ... B00T81NP18
dronning
Posts: 557
Joined: Wed Feb 13, 2013 8:56 pm
Location: MInnesota

Re: Scope caps for Aimpoint Hi Micro

Post by dronning »

SteveT wrote: Mon Apr 01, 2019 7:37 pm Have you tried contacting Aimpoint?

Google "Aimpoint Adjutment Tool" and you'll get lots hits. Amazon can get you one in a few dayshttps://www.amazon.com/AimPoint-12207-M ... B00T81NP18
Much prefer the tool versus the caps
- Dave
Certified Safety Instructor: Rifle & Pistol
They that give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety.
~ Ben Franklin
gbowers
Posts: 8
Joined: Sat Jul 23, 2016 6:45 pm
Location: Mass USA

Re: Scope caps for Aimpoint Hi Micro

Post by gbowers »

Brownells carries replacements, crazy money for what they are https://www.brownells.com/optics-mounti ... 81235.aspx. I did buy a set as I lost mine at the range :-(
-TT-
Posts: 408
Joined: Thu Oct 13, 2016 10:57 am
Location: Massachusetts

Re: Scope caps for Aimpoint Hi Micro

Post by -TT- »

If you shoot outdoors, remember the caps seal out moisture. IMO if you aren't getting rained on, they're optional. But I keep close track of mine when adjusting.
User avatar
Dipnet
Posts: 249
Joined: Tue May 27, 2014 3:21 pm
Location: Gainesville, Florida

Re: Scope caps for Aimpoint Hi Micro

Post by Dipnet »

I made scope caps using aftermarket caps available at Primary Arms (https://www.primaryarms.com/MCategories ... ccessories), which fit the Aimpoint H1. I bought two sets and cut off the deeper caps from each; these fit Fred Totts lens extension tubes perfectly). I connected the caps with a piece of cord and used black Sugru to glue cord to each cap. See attached image. These caps tightly seal the lens tubes keeping out dirt and the orange cord makes them easy to locate on bench or in gun box. Cheers, dipnet
Attachments
Rock River_Aimpoint H1 scope caps2.jpg
Rock River_Aimpoint H1 scope caps2.jpg (53.3 KiB) Viewed 4538 times
left360
Posts: 141
Joined: Mon Aug 17, 2009 2:29 pm
Location: Pacific NorthWet

Re: Scope caps for Aimpoint Hi Micro

Post by left360 »

Dipnet wrote: Fri Jun 07, 2019 2:03 am I made scope caps using aftermarket caps available at Primary Arms (https://www.primaryarms.com/MCategories ... ccessories), which fit the Aimpoint H1.
Thanks for this. Saved a bunch of searching...

Cheers, Steve
Post Reply