Due to the pistol restrictions in the UK, our live fire training time for centre fire is limited and conducted overseas. I would like to increase the spring tension on my spare Morini 162EI to 1360g for winter and early season training. The standard springs are not designed for operation at higher weights for sustained periods. As I want to set the weights accurately to the first/second stage balance of my .32 SP20, I wondered if anybody had knowledge of where suitable springs could be obtained.
Additional information: My Steyr LP5’s with the 1360 trigger unit is acceptable for the rapid stage training but this trigger unit is quite limited and my precision shooting at the higher trigger weight is my primary objective. As I single cartridge load in the c/f precision stage, shooting the single shot 162EI is not an issue and has a lovely trigger.
If anybody from Morini or Steyr is patrolling TargetTalk, their support would also be greatly welcomed.
paul-at-lans.demon.co.uk.44450.0
Morini 162Ei with 1360g trigger for centre fire training
Moderators: rexifelis, pilkguns
-
Francesco
Re: Morini 162Ei with 1360g trigger for centre fire training
You need to use the springs of the standard pistol that you can order.
morini-at-bluewin.ch.44451.44450
morini-at-bluewin.ch.44451.44450
-
Paul T (UK)
Re: Morini 162Ei with 1360g trigger for centre fire training
Many thanks.
paul-at-lans.demon.co.uk.44454.44451
paul-at-lans.demon.co.uk.44454.44451