STEYR LP 10 QUESTION

If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true

Moderators: pilkguns, m1963, David Levene, Spencer, Richard H

Forum rules
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
Post Reply
darticus
Posts: 318
Joined: Sat Sep 03, 2005 11:01 am
Location: SPARTA NEW JERSEY

STEYR LP 10 QUESTION

Post by darticus »

I know the Steyr is one of the best 10 meter pistols in the world. My question is when exceeding your guns lower pressure limit do flyers occur or do pellets go more often in a certain direction. Do they stay centered but drop only or off to one side? Thanks Ron
User avatar
Andre
Posts: 464
Joined: Sun Mar 30, 2014 12:09 pm

Re: STEYR LP 10 QUESTION

Post by Andre »

They just start to fall in my LP10 Long w/ new style brake.
darticus
Posts: 318
Joined: Sat Sep 03, 2005 11:01 am
Location: SPARTA NEW JERSEY

Re: STEYR LP 10 QUESTION

Post by darticus »

Andre wrote:They just start to fall in my LP10 Long w/ new style brake.
What would be the lowest you would shoot on the gauge? Is it good all through the green? Thanks Ron
User avatar
j-team
Posts: 1381
Joined: Mon Mar 28, 2005 2:48 am
Location: New Zealand

Re: STEYR LP 10 QUESTION

Post by j-team »

Read this: http://www.targettalk.org/viewtopic.php?f=4&t=47197

Starts about the absorber but goes on to air consumption and there's a pic of a group from machine rest with an emptying cylinder.
Gwhite
Posts: 3445
Joined: Sat Sep 04, 2004 6:04 pm
Location: Massachusetts

Re: STEYR LP 10 QUESTION

Post by Gwhite »

Steyr changed the design of their cylinder gauges at some point:

Image

Based on the old cylinders & feedback from other Steyr shooters, 80 bar is about as far down as you want to go on the new ones. That is consistent with my experience with Morinis as well.
Rover
Posts: 7059
Joined: Sat Nov 15, 2008 4:20 pm
Location: Idaho panhandle

Re: STEYR LP 10 QUESTION

Post by Rover »

Yeah, jteam, I remember that thread. It was hilarious. Maybe we'll have as much fun with this one.
darticus
Posts: 318
Joined: Sat Sep 03, 2005 11:01 am
Location: SPARTA NEW JERSEY

Re: STEYR LP 10 QUESTION

Post by darticus »

Gwhite wrote:Steyr changed the design of their cylinder gauges at some point:

Image

Based on the old cylinders & feedback from other Steyr shooters, 80 bar is about as far down as you want to go on the new ones. That is consistent with my experience with Morinis as well.
Thanks for the input. Ron
therider
Posts: 456
Joined: Fri Nov 29, 2013 6:33 pm
Location: Germany

Re: STEYR LP 10 QUESTION

Post by therider »

darticus wrote:
Gwhite wrote:Steyr changed the design of their cylinder gauges at some point:

Image

Based on the old cylinders & feedback from other Steyr shooters, 80 bar is about as far down as you want to go on the new ones. That is consistent with my experience with Morinis as well.
Thanks for the input. Ron
What does it mean? Can you shoot tens also with 40 bars? Or is it simply cheating?
Gwhite
Posts: 3445
Joined: Sat Sep 04, 2004 6:04 pm
Location: Massachusetts

Re: STEYR LP 10 QUESTION

Post by Gwhite »

therider wrote: What does it mean? Can you shoot tens also with 40 bars? Or is it simply cheating?
It's not cheating, but you'll only shoot tens if you can figure out how much to adjust the elevation of your sights between every shot.
therider
Posts: 456
Joined: Fri Nov 29, 2013 6:33 pm
Location: Germany

Re: STEYR LP 10 QUESTION

Post by therider »

Gwhite wrote:
therider wrote: What does it mean? Can you shoot tens also with 40 bars? Or is it simply cheating?
It's not cheating, but you'll only shoot tens if you can figure out how much to adjust the elevation of your sights between every shot.
:-)
SarahJ
Posts: 5
Joined: Sat Apr 26, 2014 8:34 am
Location: Bristol

Re: STEYR LP 10 QUESTION

Post by SarahJ »

Hi,

A while ago I sent my LP10 in for a service with Harry Preston and when it came back there was a statement that the regulator had been set up from 70Bar. I have found that I haven't noticed any drop off on pellet to that pressure. For practice I may shoot down to 60Bar and I haven't really noticed any drop of pellet impact either. Hope this helps.

Sarah
darticus
Posts: 318
Joined: Sat Sep 03, 2005 11:01 am
Location: SPARTA NEW JERSEY

Re: STEYR LP 10 QUESTION

Post by darticus »

ALL very helpful! Thanks for all your input. Ron
therider
Posts: 456
Joined: Fri Nov 29, 2013 6:33 pm
Location: Germany

Re: STEYR LP 10 QUESTION

Post by therider »

SarahJ wrote:Hi,

A while ago I sent my LP10 in for a service with Harry Preston and when it came back there was a statement that the regulator had been set up from 70Bar. I have found that I haven't noticed any drop off on pellet to that pressure. For practice I may shoot down to 60Bar and I haven't really noticed any drop of pellet impact either. Hope this helps.

Sarah
However if you make an ammunition test, you will see huge worsening of the grouping much before you reach 70bars,,,, but this has been discussed in length in here.
Post Reply