Fretter's delight

If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true

Moderators: pilkguns, m1963, David Levene, Spencer, Richard H

Forum rules
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
Post Reply
Rover
Posts: 7059
Joined: Sat Nov 15, 2008 4:20 pm
Location: Idaho panhandle

Fretter's delight

Post by Rover »

For those cringing in terror at the ticking time bomb they hold in their hand, I gleaned this from the Classified section:

http://www.10punkt9.de/shop/index.php?cPath=1_7

With the Euro worth about a buck right now, it's worth a shot.
Gwhite
Posts: 3444
Joined: Sat Sep 04, 2004 6:04 pm
Location: Massachusetts

Re: Fretter's delight

Post by Gwhite »

My German is pretty much non-existent. Do they indicate any sort of date for these? I'm guessing they are that price because they don't have much official service life left.
User avatar
Bob-Riegl
Posts: 329
Joined: Mon May 04, 2009 4:25 pm
Location: New York

Re: Fretter's delight

Post by Bob-Riegl »

Try to buy one from Pilkguns, and find out how good those prices are. The Euro is not worth what is was a few months back...."Doc"....thanks for the post Rover.
Rover
Posts: 7059
Joined: Sat Nov 15, 2008 4:20 pm
Location: Idaho panhandle

Re: Fretter's delight

Post by Rover »

Run a translation app.

As far as I can tell with my high school German, these are NEW aftermarket cylinders available for many types of guns.

Many Europeans speak English (it's the latest lingua Franca), so send an email if interested.
User avatar
rmca
Posts: 1211
Joined: Sun Nov 04, 2012 3:55 pm
Location: Lisbon, Portugal

Re: Fretter's delight

Post by rmca »

Gwhite wrote:My German is pretty much non-existent. Do they indicate any sort of date for these? I'm guessing they are that price because they don't have much official service life left.
Last time I held one of this cylinders, it had a clear marking of the date of manufacture.

Hope this helps
jmdavis
Posts: 184
Joined: Wed Nov 09, 2011 7:38 pm

Re: Fretter's delight

Post by jmdavis »

Shipping looks like 60€ for up to 10kilos to the US. You could likely get 5 of these for the same shipping price. This could be a good deal for a couple of shooters or a club.
mtncwru
Posts: 447
Joined: Sun Dec 12, 2010 1:50 pm
Location: San Diego, CA
Contact:

Re: Fretter's delight

Post by mtncwru »

1 EUR is $1.1445 on Paypal right now. That's almost exactly the average over the last two months.
User avatar
conradin
Posts: 1999
Joined: Sun Apr 29, 2012 1:18 am
Location: Basement.

Re: Fretter's delight

Post by conradin »

Essentially it is trading money with time. (2 to 3 weeks vs 2 to 3 days if you are in the US with Pilk). If you buy a lot then the trade will be worth it if you don't care about waiting for possibly 3 weeks.
Mike M.
Posts: 679
Joined: Fri Apr 14, 2006 11:59 am

Re: Fretter's delight

Post by Mike M. »

No, those are excellent prices. I'm not a fretter, but I'm probably going to buy two...my current tanks are expired non-manometer types.
mtncwru
Posts: 447
Joined: Sun Dec 12, 2010 1:50 pm
Location: San Diego, CA
Contact:

Re: Fretter's delight

Post by mtncwru »

Good time to buy a SCATT, too, especially if you're already on the hook for shipping.
Rover
Posts: 7059
Joined: Sat Nov 15, 2008 4:20 pm
Location: Idaho panhandle

Re: Fretter's delight

Post by Rover »

$70 shipping to the US sounds like WAY too much. Surely there's a cheaper way.
OTD
Posts: 29
Joined: Wed Aug 14, 2013 4:07 pm
Location: Switzerland & Germany

Re: Fretter's delight

Post by OTD »

10 kg = 22 lbs. For 10 kg you can haul a lot of tanks overseas.

Last time is sent parts to the US, cost was approx. $20.- for 1 lb, deliverd in 7-10 days. With insurance it’s about $25.-. 1 lb is about the weight of 2 tanks.

The maker is a group of shooting enthusiats who is builidng tanks for other target shooters. They dont have any stock for immediate shipping. Schedule about 1 week until the order is ready to ship.
BobGee
Posts: 591
Joined: Fri Oct 01, 2010 6:43 am
Location: Sydney, Australia

Re: Fretter's delight

Post by BobGee »

Looks like the prices include the German VAT (MwSt) at 19% which would not, I think, apply to exported items. So, even cheaper!

Bob
Post Reply