New type cylinder Pardini k12 ?

If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true

Moderators: pilkguns, m1963, David Levene, Spencer, Richard H

Forum rules
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
Post Reply
Avery
Posts: 31
Joined: Thu Apr 05, 2012 2:36 am
Location: Russia Moscow

New type cylinder Pardini k12 ?

Post by Avery »

K12 with new type cylinder?
Attachments
Cyl1.JPG
Cyl2.JPG
Top
scerir
Posts: 363
Joined: Tue Mar 23, 2004 11:09 am
Location: Rome - Italy

Re: New type cylinder Pardini k12 ?

Post by scerir »

Avery wrote:K12 with new type cylinder?
Yes, it is. The reason is that sometimes it was very difficult to unscrew the old cylinder. Now, with the new one, you can also use tools.
Top
pauln
Posts: 120
Joined: Sat Sep 22, 2007 4:10 pm
Location: New Zealand

Re: New type cylinder Pardini k12 ?

Post by pauln »

scerir wrote:
Avery wrote:K12 with new type cylinder?
Yes, it is. The reason is that sometimes it was very difficult to unscrew the old cylinder. Now, with the new one, you can also use tools.
I have found mine hard to unscrew at times , are Pardini going to replace existing cylinders ?
Top
User avatar
rmca
Posts: 1211
Joined: Sun Nov 04, 2012 3:55 pm
Location: Lisbon, Portugal

Post by rmca »

Are the new cylinders compatible with the K10? And K2?
Top
Leon
Posts: 834
Joined: Mon Jul 07, 2008 4:04 am
Location: Sydney, Australia

Re: New type cylinder Pardini k12 ?

Post by Leon »

pauln wrote:
scerir wrote:
Avery wrote:K12 with new type cylinder?
Yes, it is. The reason is that sometimes it was very difficult to unscrew the old cylinder. Now, with the new one, you can also use tools.
I have found mine hard to unscrew at times , are Pardini going to replace existing cylinders ?
The easiest way to unscrew K12 cylinders is to use a small rubber mat that is sold in kitchen shops / supermarkets to help unscrewing food jars with tight lids. The mat is about 5" x 5". Works a treat.
Top
pauln
Posts: 120
Joined: Sat Sep 22, 2007 4:10 pm
Location: New Zealand

Re: New type cylinder Pardini k12 ?

Post by pauln »

Leon wrote:
pauln wrote:
scerir wrote:
Avery wrote:K12 with new type cylinder?
Yes, it is. The reason is that sometimes it was very difficult to unscrew the old cylinder. Now, with the new one, you can also use tools.
I have found mine hard to unscrew at times , are Pardini going to replace existing cylinders ?
The easiest way to unscrew K12 cylinders is to use a small rubber mat that is sold in kitchen shops / supermarkets to help unscrewing food jars with tight lids. The mat is about 5" x 5". Works a treat.
Good thinking will give it a try , next time I have problems . Most of the time its fine
Top
scerir
Posts: 363
Joined: Tue Mar 23, 2004 11:09 am
Location: Rome - Italy

Re: New type cylinder Pardini k12 ?

Post by scerir »

pauln wrote: I have found mine hard to unscrew at times , are Pardini going to replace existing cylinders ?
I do not think so (unless there are big problems with the old cylinders). Sometimes, trying to unscrew the old cylinders people damage the clamping screw on the frame of the pistol. It happened.
Top
therider
Posts: 456
Joined: Fri Nov 29, 2013 6:33 pm
Location: Germany

Re: New type cylinder Pardini k12 ?

Post by therider »

Leon wrote: The easiest way to unscrew K12 cylinders is to use a small rubber mat that is sold in kitchen shops / supermarkets to help unscrewing food jars with tight lids. The mat is about 5" x 5". Works a treat.
Gosh, I hope we had that in EU! I always struggle to open home made jam and marmalade jars!!!
Top
Post Reply

Return to “Olympic Pistol”