Walther Special Grease (Spezialfett) Replacement

If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true

Moderators: pilkguns, m1963, David Levene, Spencer, Richard H

Forum rules
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
Post Reply
rloebler
Posts: 30
Joined: Fri Jul 06, 2012 8:03 pm
Location: Australia

Walther Special Grease (Spezialfett) Replacement

Post by rloebler »

I've recently purchased a Walther SSP and LP400. The SSP came with a small tube of Special Grease to lubricate the springs. The local distributor has just told me that Walther don't sell this as an accessory and that i should source a good non teflon based grease instead. Similarly for the LP400 they suggest a good silicon based grease. I'm relatively new to this sport and would welcome suggestions from the community as to what products may be suitable.

Thanks.

Rick
ALBEITAR
Posts: 12
Joined: Fri Aug 10, 2007 3:38 pm
Location: SPAIN

Post by ALBEITAR »

Good question, I wonder about this grease too... will be a silicon based grease, or a molly grease viable options?

Regards
SMBeyer
Posts: 149
Joined: Wed Mar 17, 2010 10:06 pm
Location: Illinois

Post by SMBeyer »

Go to a SCUBA store and buy their silicone grease. It comes in a little flat container with a clip on lid. You can use it for the air pistol seals also. A little goes a long way and be sure not to get any on the threads for the cylinder when lubing the seal. Scott
fc60
Posts: 739
Joined: Fri Nov 25, 2005 11:46 am
Location: Western Washington State, USA 98385

Walther Grease

Post by fc60 »

Greetings,

I wrote to Walther asking about the lube for my Haemmerli SP20 and 280 sear.

They replied stating they use "Liqui-Moly" LM47

I apply a "wee bit" with a toothpick to the sear engagement surfaces. It will reduce your trigger weight so double check before going to your next match.

I found a tube on the Internet. It is used to lubricate constant velocity joints on motor cars.

The tube I got was the 100 gram size. Looks a lot like a tube of toothpaste, do not leave it in the bathroom.

Cheers,

Dave
Attachments
LM47A.JPG
slofyr
Posts: 273
Joined: Sun Oct 10, 2004 1:12 pm
Location: Pacific NW

Post by slofyr »

In the US, AutohausAZ stocks LM47.

http://tinyurl.com/avc4hhx

FYI...
Liqui Moly GmbH replaced No.2004 LM47 with No.2003 Long-Life Grease. Same product with different label.
Last edited by slofyr on Wed Feb 20, 2013 1:10 pm, edited 1 time in total.
Spencer
Posts: 1889
Joined: Fri Feb 24, 2006 9:13 pm
Location: Sydney, Australia
Contact:

Re: Walther Grease

Post by Spencer »

fc60 wrote:The tube I got was the 100 gram size. Looks a lot like a tube of toothpaste, do not leave it in the bathroom.
slipperiest teeth in town?
Post Reply