Balance of FWB AW93 vs Pardini

If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true

Moderators: pilkguns, m1963, David Levene, Spencer, Richard H

Forum rules
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
Post Reply
Mike M.
Posts: 677
Joined: Fri Apr 14, 2006 11:59 am

Balance of FWB AW93 vs Pardini

Post by Mike M. »

I'm considering either an AW93 or a Pardini for my next .22 pistol. Right now, I'm leaning toward the Feinwerkbau, but tend to favor a muzzle-heavy gun (I shoot a Hammerli 280 with 2 steel weights, or a Hammerli 208S with the 250g weight). What's the balance like on these two guns? Thanks.
User avatar
Bob-Riegl
Posts: 329
Joined: Mon May 04, 2009 4:25 pm
Location: New York

Post by Bob-Riegl »

Using the relationship between AW93/ IZH35M balance wise due to "similarity" in design (owning the IZZY not the AW). I favor the Pardini SP as far as balance and the forward weight and grip rake angle are near perfect IMHO. I have shot the SP, HP for better than twenty years and currently use a new SP mechanical trigger. Included also is the fact that the Pardini has six tungsten weights in the barrel front which can be removed in case the fore end weight is too heavy. The Pardinit two stage trigger is a dream. A friend shot the AW for four years in Bullseye and has given up on it for several reasons and moved to the Pardini---color him happy. . I am sure you can get weights for the AW similar to the ones made available by after market for the IZH. JMHO ..."Doc"
Isabel1130
Posts: 1364
Joined: Mon Jan 28, 2008 7:19 pm
Location: Wyoming

Post by Isabel1130 »

The Hammerli 208s with the 250g weight is still a lighter gun muzzle weight wise than the AW with the standard recoil buffer. Are there any other reasons why you think you might prefer the Pardini or the AW?
yana
Posts: 359
Joined: Mon Sep 20, 2010 9:58 am
Location: netherlands

Post by yana »

I also favoured the Pardine above the FWB.
The Tesro was even frontheavier than the Pardini.Didnt like the FWB grip either, loved the pardini's.
Mike M.
Posts: 677
Joined: Fri Apr 14, 2006 11:59 am

Post by Mike M. »

Isabel1130 wrote:The Hammerli 208s with the 250g weight is still a lighter gun muzzle weight wise than the AW with the standard recoil buffer. Are there any other reasons why you think you might prefer the Pardini or the AW?
I tend to favor a muzzle-heavy gun. But I like the Hammerli grip angle.
shadow
Posts: 358
Joined: Tue Nov 15, 2005 7:56 pm

Post by shadow »

You can always add weight - even with wheel weights - but it is hard to remove weight.
David M
Posts: 1675
Joined: Wed Mar 24, 2004 6:43 pm

Post by David M »

If you shoot a 280 and like it feel and trigger, look at the Hammerli SP20RRS. This is their third version with all the bugs out and well proven.
Same trigger assy with all the ajustments.
Very light in the nose without weights, but will take a internal weight just foeward of the trigger to weight it aft towards your hand or a external barrel weight (different weights) to weight the front. Very adjustable weight anf feel.
I have both the .22 and .32, the .32 unweighted and the .22 internally weighted to balance the same as the .32. (The .32 has the heavier slide.)
Muffo
Posts: 491
Joined: Sat Nov 22, 2008 4:50 am
Location: Victoria, Australia

Post by Muffo »

What are you using it to shoot. If it's rapid or standard the aw would be on the very bottom of the list the barrel line is way to high. If it's sport the aw would be looking good
Mike M.
Posts: 677
Joined: Fri Apr 14, 2006 11:59 am

Post by Mike M. »

Standard, possibly Rapid.
Muffo
Posts: 491
Joined: Sat Nov 22, 2008 4:50 am
Location: Victoria, Australia

Post by Muffo »

Mike M. wrote:Standard, possibly Rapid.
Aw is very accurate and fine for dueling because you don't have a follow uo shot. For 10 seconds and rapid the barrel is way to high and it has way to much muzzle flip.
Tycho
Posts: 1049
Joined: Tue Jul 25, 2006 1:25 am
Location: Switzerland

Post by Tycho »

You can get the barrel axis almost down on the hand, but for the normal shooter, muzzle flip on the AW93 is a problem. FWB bought the design where the slide runs up a angled ramp towards the rear. That would get you a bit of torque against the muzzle jump, IF you've got a really strong wrist. If not, the contrary happens and the pistol moves a lot more than if the slide ran straight back., and that is the case for almost everybody. The only current pistol jumping around worse than the AW93 is the SSP.

The Pardini really only works well with a angled grip. If you're coming from the 208/280, that may be a problem. The SP20 is not a lot better in that department, but a bit, and has probably the best trigger system around. If you want some steel on that gun, and a really upright grip angle, and not a lot of muzzle jump, and you're not "trigger sensitive", I'd take a look at the Benelli MP90S.
Post Reply