Clear Iris O.D.

ON_THE_EDGE · Post by **ON_THE_EDGE** » Wed Oct 24, 2012 5:39 pm

Can someone out there tell me the outside diameter of the 22mm clear irises?

ON_THE_EDGE · Post by **ON_THE_EDGE** » Sun Oct 28, 2012 2:06 pm

Great! Thanks for all the help in this matter guys! All the responses to my queries are greatly appreciated!

Pat McCoy · Post by **Pat McCoy** » Sun Oct 28, 2012 6:30 pm

I think you have us all perplexed. The outside diameter of the 22mm clear insert is 22mm.

ON_THE_EDGE · Post by **ON_THE_EDGE** » Sun Oct 28, 2012 8:03 pm

Well, never having had a rifle with that size sight I did not know if that measurement was for the inside or outside of the tube. OK, now is that measurement the opening through the sight or is that the measurement of the diameter of the iris insert which will be larger?

djsomers · Post by **djsomers** » Mon Oct 29, 2012 12:34 am

Pat McCoy wrote:The outside diameter of the 22mm clear insert is 22mm.

I think that is your answer.....

pfiori · Post by **pfiori** » Mon Oct 29, 2012 7:01 am

The aperture inserts for the common (Anschutz, Gehmann) 22mm sights are nominally 20mm OD.
The 22mm designation refers to the insert holder thread size which is M22X0.5
The OD of the sight housing will be larger than 22mm and the thru diameter will be nominally 18mm.
Hope this answers your question.

Pete

ON_THE_EDGE · Post by **ON_THE_EDGE** » Mon Oct 29, 2012 4:34 pm

Thanks Pete, that is what I was looking for.

djsomers · Post by **djsomers** » Mon Oct 29, 2012 9:27 pm

Yes thank you Pete for the good information.

TargetTalk

Clear Iris O.D.

Clear Iris O.D.

22MM sight insert diameter