Rink grip on LP10E

lg2011 · Post by **lg2011** » Sun Sep 02, 2012 2:08 am

Can anyone please share your experience with a Rink grip on a Steyr LP10e? The Morini grip that came with this pistol is pretty good. Is a Rink better?
LG

Tycho · Post by **Tycho** » Sun Sep 02, 2012 2:09 am

If it fits your hand, and you like its feel, and it points the gun in the right direction, yes. If not, no.

flolo · Post by **flolo** » Sun Sep 02, 2012 7:19 am

Depends on your hand. If you have smaller hands it may be more difficult on the rink to get it fitting as the nuts which keep the palm shelf attached and the space for the circuit board take much room. If you have big hands, no problem, but on smaller hands you maybe cant carve enough wood. Maybe thats the reason you dont see jin jong not using the rink anymore. And, imho, morini grips are more anatomically correct from the beginning.

SMBeyer · Post by **SMBeyer** » Sun Sep 02, 2012 8:13 am

flolo wrote: And, imho, morini grips are more anatomically correct from the beginning.

That just proves everybody is different and there is no way to know unless you try them. I dont have an E but on my lp-10 the Morini felt horrible and I strugled with getting it to fit for a long time and then got a rink and with two very minor adjustments it fits perfectly. So you won't know unless you try it. Scott

lg2011 · Post by **lg2011** » Sun Sep 02, 2012 8:41 am

I actually have tried and installed a Rink on my Morini Titanium and my score went up by at least 10 points. However I'm unsure if this will have the same result with an LP10e as the Morini grip on it is much better than the titanium version. I'm a bit reluctant to just order the Rink not because if the cost but because i'm a very impatient person and waiting 2 to 3 months to me is a very very difficult endevour. I have placed an ad in the for sale section of WTB a rink grip so I won't have to wait but I did not get any response.
LG

Tycho · Post by **Tycho** » Sun Sep 02, 2012 9:05 am

Well, how many LP10e grips did you expect to be lying around? That pistol is not exactly common, and a significant percentage of shooters on that level will wirk with custom grips anyway. I only ordered my LP50e when Rink confirmed that they could copy "my" template grip onto it., and I still had to work on it.

The Morini and the Rink actually follow quite different philosophies, so it's not surprising that a person that likes the one doesn't like the other.

flolo · Post by **flolo** » Sun Sep 02, 2012 5:18 pm

@smbeyer: don't get me wrong, as it always depends on one's hand. To me, it just seems easier on the morini grips to carve them into a fitting shape then the rinks. And even custom made grips don't always fit from the beginning! I think you can get close, but it will take you several months to make them really fit. So getting to know how to use a dremel, sandpaper and wood paste isnt the worst idea...

John Marchant · Post by **John Marchant** » Mon Sep 03, 2012 6:01 pm

I thought that the LP10E was supplied with a grip from a different manufacturer and not a Morini.
I was lead to believe that they were from a company in Spain, but I could be wrong.
The standard grip on my LP10E only needed a small amount of work to make it fit very well.

Tycho · Post by **Tycho** » Tue Sep 04, 2012 1:53 am

There are differing statements as to the origins of the LP10E grips. The factory grip on my 50e is definitely a spanish one, terrible shape, good for firewood only. On the other hand, Morini just recently claimed that they were the exclusive supplier for Steyr Air Pistols, so I don't know if Steyr went back.

John Marchant · Post by **John Marchant** » Tue Sep 04, 2012 5:23 pm

The reason I thought that my grip was not Morini was due to the fact that there is no CM insignia on the grips.

lg2011 · Post by **lg2011** » Wed Sep 05, 2012 12:58 am

The LP10e and LP50 were both made by Morini. I like the 10e better because it feels thicker. I think it's because there 2 batteries in it.

Thank you very much for all your responses.

LG

Brian James · Post by **Brian James** » Wed Sep 05, 2012 8:11 am

Tycho wrote:There are differing statements as to the origins of the LP10E grips. The factory grip on my 50e is definitely a spanish one, terrible shape, good for firewood only. On the other hand, Morini just recently claimed that they were the exclusive supplier for Steyr Air Pistols, so I don't know if Steyr went back.

Tycho,

Would you happen to know the name of the Spanish company that is/was making grips for Steyr?

Thanks,

Brian

llorensan · Post by **llorensan** » Wed Sep 05, 2012 10:13 am

Brian James wrote:
Tycho wrote:There are differing statements as to the origins of the LP10E grips. The factory grip on my 50e is definitely a spanish one, terrible shape, good for firewood only. On the other hand, Morini just recently claimed that they were the exclusive supplier for Steyr Air Pistols, so I don't know if Steyr went back.
Tycho,

Would you happen to know the name of the Spanish company that is/was making grips for Steyr?

Thanks,

Brian

Hi
Not sure about LP10e but the grip of my LP10 is made from:

http://www.ibergrips.com/index.php

Lorenzo

Tycho · Post by **Tycho** » Wed Sep 05, 2012 3:06 pm

Ibergrips, yes.

antispar · Post by **antispar** » Mon Sep 10, 2012 2:42 am

Tycho wrote:The Morini and the Rink actually follow quite different philosophies, so it's not surprising that a person that likes the one doesn't like the other.

Tycho, what do you mean by "different philosophies"? In which way they differ?

I didn't like Morini grip as it was too thin and went after Rink's, which fit me better.

Tycho · Post by **Tycho** » Mon Sep 10, 2012 3:18 am

A gripmaker will usually follow his idea of how he wants to position the hand in relation to the gun. Most obvious aspects are vertical and lateral angles, but there are more. If you look at early, middle-age and new Morini grips, Nill, Rink, or new Cesare Morini (Matchguns) grips you can see the difference quite clearly. Not every philosophy fits every gun. Not everybody likes the same philosophy. It's way more important (IMO, YMMV) than how the grip "fits" the hand - I can get a good fit in 10 minutes, but that grip only works when the angles and contact points are defined correctly.

taz · Post by **taz** » Mon Sep 10, 2012 3:36 am

I can understand the importance on a pistol like Morini 162 where the grip is not adjustable.
But on a pistol like LP10E, where it is possible to adjust these angles, do you mean that these might be so different that even adjusting the grip to your liking will not be enough?

ghostrip · Post by **ghostrip** » Mon Sep 10, 2012 4:32 am

From my experience i will agree with Tycho. In my first LP10 i had both the factory grip (with CM insignia on it) and a rink grip. while the general dimensions were roughly the same the feeling was very very different but both didn't work for my hand. The grips that worked best for me were the factory LP300 grip (plain laminated blue), my match-guns MG-2 ( from dimensions i gave to the factory) and my izh-46 grip (heavily modified version of an arnie vitarbo grip). somehow after all this years the soviet concept of sticking a rough grip to a match gun and let the shooter curve the grip to his own exact specifications (with help perhaps from local coach) makes more sense.

antispar · Post by **antispar** » Tue Sep 11, 2012 1:41 am

Tycho wrote:A gripmaker will usually follow his idea of how he wants to position the hand in relation to the gun. Most obvious aspects are vertical and lateral angles, but there are more. If you look at early, middle-age and new Morini grips, Nill, Rink, or new Cesare Morini (Matchguns) grips you can see the difference quite clearly. Not every philosophy fits every gun. Not everybody likes the same philosophy. It's way more important (IMO, YMMV) than how the grip "fits" the hand - I can get a good fit in 10 minutes, but that grip only works when the angles and contact points are defined correctly.

Okay, I see what you mean. Of course, I had to check two grips (CM and Rink) I have and yes there are differences in angles between them, but in shaping too. Thanks.