Steyr LP10: firing while unlocked

If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true

Moderators: pilkguns, m1963, David Levene, Spencer, Richard H

Forum rules
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
Post Reply
Alexey931
Posts: 29
Joined: Thu Mar 11, 2004 1:44 am
Location: St.-Petersburg, Russia

Steyr LP10: firing while unlocked

Post by Alexey931 »

Hi,

I hope that Olympic Pistol includes airguns too. Somehow my pistol started discharging unlocked (dry fire position), as well as locked. What could it be? I'm sorry for an improper question, but there isn't a gunsmith readily available...
MDK
Posts: 23
Joined: Fri Oct 05, 2007 6:24 pm
Location: Brazil

Post by MDK »

Hi Alexei,

probably you are having problems with the cam. Take a look at this topic:
viewtopic.php?t=26935&highlight=lp10+dry+fire

You can see more details in this video:
http://www.youtube.com/watch?v=_GEBx2zY ... portwaffen

good luck
Alexey931
Posts: 29
Joined: Thu Mar 11, 2004 1:44 am
Location: St.-Petersburg, Russia

Post by Alexey931 »

Thank you very much, MDK! The screw in question loose by two and a half threads. The price of ignorance...
Alexey931
Posts: 29
Joined: Thu Mar 11, 2004 1:44 am
Location: St.-Petersburg, Russia

Post by Alexey931 »

A sequel to the story: it keeps on unscrewing. After three to five hundred of dry fire shots the screw in question is quite loose again. What may be wrong?
User avatar
pilkguns
Site Admin
Posts: 1187
Joined: Fri Feb 20, 2004 7:22 pm
Location: Monteagle, TN

Post by pilkguns »

after you have it adjusted like you want it, put a small drop of fingernail polish on the threads
Alexey931
Posts: 29
Joined: Thu Mar 11, 2004 1:44 am
Location: St.-Petersburg, Russia

Post by Alexey931 »

This is no adjustment screw. #16 according to the exploded view. Nail polish would be out of place there, I'm afraid.
MDK
Posts: 23
Joined: Fri Oct 05, 2007 6:24 pm
Location: Brazil

Post by MDK »

Alexey,

send an email to Steyr and talk about your problem. They will sent to you the best answer very quick.

good luck
Post Reply